Skip to content
Open access

Detection of Known Railway Wheel Defects Using Sound Pressure Measurements from a Full-Scale Train

Nov 2026 · Machines · Vol 14, pp. 1294 · 0 citations · 30 references

Abstract

Railway wheel defects are a major source of noise and vibration and may compromise operational safety if not detected at an early stage. Although numerous condition monitoring techniques have been proposed, validation under real operating conditions remains limited because of the scarcity of datasets with independently known defect locations and characteristics. This study presents an in-situ investigation of wheel defect detection using sound pressure measurements acquired during the passage of a full-scale train equipped with both reference wheels and wheels containing pre-identified defects. Experimental campaigns were conducted across 12 distinct test conditions at train speeds ranging from 10 to 60 km/h in both travel directions to evaluate the influence of operating conditions on the acoustic response. The acquired signals were analysed in the time and frequency domains. Defects were identified by combining the local sound pressure amplitude levels with temporal fluctuation indices derived from moving standard deviation. This approach enhanced transient acoustic signatures and facilitated the localisation of wheel defect-related events. The results demonstrate that the proposed Energy-Variance Product methodology successfully isolates defect-related transient acoustic features across all tested speeds, effectively suppressing continuous background locomotive noise and providing reliable diagnostic data, while the unique experimental configuration provides reliable data for validating acoustic monitoring methods under real railway operating conditions. These findings support the use of sound pressure measurements as a practical tool for railway condition monitoring and establish a valuable experimental benchmark for future diagnostic methods.

Read PDF

Similar papers

Open access 2026

PASS-BY NOISE ASSESSMENT OF CONTEMPORARY AND LEGACY RAIL VEHICLES ON SERBIAN RAILWAYS

Pass-by noise represents one of the key environmental criteria in the approval and operation of modern railway vehicles. In addition to vehicle design, the condition of the track and braking technology significantly influence the measured noise levels. During the type testing of a diesel track inspection vehicle on the...

Goran Šimić, Aleksandra Kostić-Miličić, D. Milković et al. · 0 citations
Review Open access Oct 2026

Railway External Noise Analysis and Mitigation with a Proposed Multi Channel Diagnostic Framework

Railway external noise becomes more difficult to diagnose as train speed rises because wheel-rail, aerodynamic, structural, and environmental contributions overlap in both time and frequency. This study combines a literature-based comparison of mitigation measures with Python analysis of three single-channel train pass...

Zi-Mo Luo · 0 citations
Conference Open access Oct 2026

Ambient vibration–based damage detection for sustainable railway infrastructure: a case study of the Vänersborg railway bascule bridge

Structural Health Monitoring (SHM) has been extensively investigated for bridge damage detection. However, documented field cases where SHM systems have captured data both before and after a verified structural damage event are still limited. Reliable early identification of structural condition changes can support ris...

Quang-Vinh Pham, T. Tien, Thuy Van Tran Thi · 0 citations
Preprint Oct 2026

Damage detection in railway wheels from impact-induced ultrasonic ring-down using self-referenced decay features

This study evaluates a non-contact screening method for stationary railroad wheelsets using air-coupled ultrasonic measurements excited by hammer impacts. Two decay features are considered. First, an effective damping ratio is obtained by normalizing the measured decay rate by the dominant response frequency. Second, s...

Aashish Shaju, Steve C. Southward, Mehdi Ahmadian · 0 citations
Open access Oct 2026

Robust Range-Doppler Acoustic Feature Fusion for Unauthorised Personnel Crossing Detection on Underground Belt Conveyors

Unauthorised personnel crossing underground belt conveyors poses a serious safety risk in coal mines. To improve the reliability of non-contact crossing detection under complex acoustic interference, this paper proposes an acoustic sensing method based on distance–velocity feature fusion. An adaptive acoustic interfere...

Yu-Qing Yin, Bao-Xuan Xu, Xu Yang et al. · 0 citations

We use cookies to run the site and, with your consent, for analytics and to show ads. See our Cookie Policy.