Ambient vibration–based damage detection for sustainable railway infrastructure: a case study of the Vänersborg railway bascule bridge
Abstract
Structural Health Monitoring (SHM) has been extensively investigated for bridge damage detection. However, documented field cases where SHM systems have captured data both before and after a verified structural damage event are still limited. Reliable early identification of structural condition changes can support risk-informed maintenance, service-life extension, and the resilience and sustainability of aging transport infrastructure. This study presents an independent analysis of publicly available acceleration data from the Vänersborg railway bascule bridge in Sweden, where a crack in a critical truss member was identified during service. The bridge is instrumented with multiple types of sensors, including accelerometers, as part of a long-term monitoring system. In this study, acceleration data recorded before and after the reported damage event were analyzed in the frequency domain. A window-based Fast Fourier Transform (FFT) approach was applied to identify the predominant spectral peaks from recorded ambient acceleration segments, while high-amplitude responses were filtered using an acceleration threshold. The results show that a significant change in the estimated predominant spectral peak was detected at sensor A5, whereas a slight spectral shift was observed at sensor A3 and relatively stable responses were observed at the other sensors. This observation suggests that the sensitivity of frequency-based damage indicators depends strongly on sensor location, measurement direction, and the relationship between the damage location and the local vibration response. The results indicate that ambient acceleration monitoring can capture condition-sensitive changes in the measured spectral response. The study highlights the importance of long-term monitoring data and appropriate sensor placement for improving the reliability of vibration-based damage detection in bridge structures. Accordingly, the workflow can support targeted inspection and lifecycle management of aging railway bridges as part of a resilient and sustainable infrastructure strategy.