Pass-by noise represents one of the key environmental criteria in the approval and operation of modern railway vehicles. In addition to vehicle design, the condition of the track and braking technology significantly influence the measured noise levels. During the type testing of a diesel track inspection vehicle on the upgraded Belgrade–Novi Sad railway line, pass-by noise measurements were conducted on various passenger and freight trains under identical, controlled experimental conditions. This setup enabled a direct acoustic comparison between contemporary and legacy rolling stock, including electric multiple units (EMUs), freight trains with different braking systems, and multiple generations of electric locomotives. All measurements complied with the EN ISO 3095:2025 standard, with track acoustic characteristics validated through rail roughness and track decay rate (TDR) assessments. The obtained results demonstrate substantial differences in environmental noise emission between older and modern rolling stock. Notably, freight wagons equipped with cast iron brake blocks generated approximately 9 dB higher pass-by noise than wagons fitted with composite brake blocks. Furthermore, modern electric locomotives exhibited significantly lower noise emissions than their legacy counterparts. These findings underscore the critical role of advanced braking technologies in mitigating railway noise and highlight the environmental benefits of fleet modernization in achieving compliance with current European Technical Specifications for Interoperability (TSI).
Railway external noise becomes more difficult to diagnose as train speed rises because wheel-rail, aerodynamic, structural, and environmental contributions overlap in both time and frequency. This study combines a literature-based comparison of mitigation measures with Python analysis of three single-channel train pass...
Zi-Mo Luo· Applied and Computational En...· 0 citations
Railway wheel defects are a major source of noise and vibration and may compromise operational safety if not detected at an early stage. Although numerous condition monitoring techniques have been proposed, validation under real operating conditions remains limited because of the scarcity of datasets with independently...
Felipe Klein Fiorentin, Fernanda Carolina Sousa, Amanda Conradt et al.· Machines· 0 citations
Excessive interior noise in tunnel segments of a 120 km/h suburban railway prompted a combined field-measurement and modelling investigation. Interior and exterior noise tests of the train of the infrastructure were conducted both in tunnels and on open-track sections. The dominant sound sources were identified and t...
Urban traffic noise is not only dependent on the source but also on the environment. This is not explicitly represented in standardized measurement procedures such as the Statistical Pass-By (SPB) method, which captures pass-by noise without urban structures. This study investigates vehicle pass-by noise with simplifie...
Chalotorn Möhlmann, L. Aspöck, J. Fels· npj Acoustics· 0 citations
<div class="section abstract"><div class="htmlview paragraph">Stringent environmental noise regulations in India, specifically the transition
to IS 3028:2023 (Part 2), have established revised pass-by noise (PBN) limits
for commercial vehicles ranging from 74 dB(A) to 75 dB(A) based on gross vehicle
weight (GVW) and...
Mohit Gupta· SAE technical paper series· 0 citations
The rapid expansion of railway systems has intensified concerns regarding the structure-borne noise (SBN) of bridges, which is governed by the coupled train–track–bridge interaction. Conventional prediction approaches typically rely on two or more separate software platforms, in most of which the structural response is...
Wei-Lun Hsu, Hua-Yu Lee· Journal of Low Frequency Noi...· 0 citations
We use cookies to run the site and, with your consent, for analytics and to show ads.
See our Cookie Policy.