Oct 2026· Applied and Computational Engineering· 0 citations
Abstract
Railway external noise becomes more difficult to diagnose as train speed rises because wheel-rail, aerodynamic, structural, and environmental contributions overlap in both time and frequency. This study combines a literature-based comparison of mitigation measures with Python analysis of three single-channel train pass-by recordings. The review links the TWINS wheel-rail framework, computational fluid dynamics for aerodynamic sources, and acoustic imaging methods to practical source-, path-, and receiver-side control. Time waveforms, fast Fourier transforms, spectrograms, and one-third-octave bands show persistent energy between 500 and 1000 Hz, but the 300 km/h recording does not display the aerodynamic dominance expected from speed-based theory. Because microphone position, reflection, wind, wheel and rail condition, and the use of one recording channel can all change the apparent spectrum, the measurements are interpreted as band-based indicators rather than definitive source separation. The comparison also shows that noise control requires trade-offs among acoustic performance, maintenance, cost, and operating conditions. A future diagnostic architecture is therefore proposed using synchronised microphone and vibration arrays, moving-source beamforming, source-separation algorithms, and edge feature extraction before wireless transmission. This extension would connect physical noise models with spatially resolved measurements and more reliable intervention decisions.
Pass-by noise represents one of the key environmental criteria in the approval and operation of modern railway vehicles. In addition to vehicle design, the condition of the track and braking technology significantly influence the measured noise levels. During the type testing of a diesel track inspection vehicle on the...
Goran Šimić, Aleksandra Kostić-Miličić, D. Milković et al.· Proceedings· 0 citations
Excessive interior noise in tunnel segments of a 120 km/h suburban railway prompted a combined field-measurement and modelling investigation. Interior and exterior noise tests of the train of the infrastructure were conducted both in tunnels and on open-track sections. The dominant sound sources were identified and t...
Railway wheel defects are a major source of noise and vibration and may compromise operational safety if not detected at an early stage. Although numerous condition monitoring techniques have been proposed, validation under real operating conditions remains limited because of the scarcity of datasets with independently...
Felipe Klein Fiorentin, Fernanda Carolina Sousa, Amanda Conradt et al.· Machines· 0 citations
Low-frequency (< 3000 Hz) acoustic emission sensing is ideal for long-distance railway monitoring due to its high propagation speed and low attenuation. However, heavy-tailed impulsive noise often compromises signal fidelity and monitoring reliability. Traditional correntropy matching pursuit (CMP) with Gaussian kern...
Guo-Dong Yue, Wen-Wang Xing, Yuan-Yuan Zou et al.· Structural Health Monitoring· 0 citations
Assessing track condition quality is essential for ensuring operational safety and efficiency in high-speed railways. Traditional track irregularity detection relies on dedicated inspection vehicles, which are costly and limited by low inspection frequency. To address these limitations, this study proposes FFT-Info...
Xiao-Hui Wang, Hai Liu, Yan-Liang Du et al.· Journal of computing in civi...· 0 citations
We use cookies to run the site and, with your consent, for analytics and to show ads.
See our Cookie Policy.