Skip to content
Open access

Material and Interface Design of Colorless, Heat-Resistant Fluorinated Polyimides for Flexible and Rigid Perovskite Solar Cells

Nov 2026 · Energies · Vol 19, pp. 5279 · 0 citations · 50 references

Abstract

To achieve efficient solar-to-electricity conversion, third-generation photovoltaics represented by perovskite solar cells (PSCs) have attracted tremendous interest. However, perovskites are vulnerable to humidity, oxygen and heat, and insufficient device stability hinders their commercialization. Polyimides (PIs), polymers with facile preparation and superior comprehensive properties, are widely used in electronics for their great mechanical strength, high-temperature tolerance and biocompatibility. PIs exhibit good moisture and oxidation resistance under harsh conditions, which well offsets perovskites’ intrinsic environmental-sensitivity drawback and makes PIs promising candidates for solving the stability bottleneck of PSCs. Herein, three fluorinated transparent PIs were synthesized through molecular-structure design and adopted as flexible substrates and auxiliary modification layers for self-assembled monolayers (SAMs). The 6FDA-TFMB film shows a maximum visible-light transmittance of 90.7%, a 5% weight-loss temperature above 400 °C and a glass-transition temperature of 339 °C, and flexible PSCs based on it obtain a power conversion efficiency (PCE) of 18.06%. Hydroxyl-containing 6FDA-6FAP was further used to construct PI/SAM composite hole-selective layers, which suppress SAM aggregation, increase SAM anchoring coverage on ITO, optimize perovskite crystallization and passivate buried-interface defects. Rigid 1.68 eV wide-bandgap perovskite devices with this composite interface deliver a PCE improvement from 22.48% to 23.15% with greatly enhanced thermal and environmental stability. This work demonstrates that transparent heat-resistant PIs can act as both high-performance flexible substrates and synergistic buried-interface regulators, providing new material strategies for efficient, stable perovskite photovoltaics.

Read PDF

Similar papers

Review Nov 2026

ITO-free perovskite solar cells: From past milestones to future prospects

Indium tin oxide (ITO) has long served as the dominant transparent conducting electrode employed in both rigid and flexible perovskite solar cells (PSCs). However, the strong dependence on ITO, which is plagued by the scarcity of indium, its intrinsic brittleness, and high-temperature processing constraints, has underm...

Prashant Kumar, Kyungho Kim, Wonjune Lee et al. · 0 citations
Oct 2026

Decoupled self-assembled monolayer and perovskite deposition for efficient flexible solar modules.

The power conversion efficiency (PCE) and stability of flexible perovskite solar modules (PSMs) are less than those of their rigid devices because surface hydroxyls desorption on flexible substrates, which disrupts self-assembled monolayer (SAM) anchoring and perovskite crystallization. We developed a decoupled SAM-per...

Ye-Yong Wu, Xi-Kun Zhang, Tian-Kai Zhang et al. · 0 citations
Open access Sep 2026

Fluorination-Dependent Phosphonic Acid Additives for Enhanced Perovskite Film Quality, Stability, and Photovoltaic Performance in Inverted Solar Cells

Defect passivation is essential for suppressing non-radiative recombination and improving the stability of perovskite solar cells. In this work, we examine how the degree of fluorination in benzylphosphonic acid additives affects film quality and device performance. Two fluorinated analogs are compared, and 2,3,4,5,6-p...

Hai-Lin Yang, Yong-Jie Wu, Lu-Lu Shen et al. · 0 citations
Open access

Vacuum process for perovskite solar cell for indoor light application

Metal-halide perovskite-based materials are attractive for photovoltaic applications because of low-cost production. Moreover, perovskite materials provide good absorption coefficient, low deep trap density, and long charge carrier lifetime, which are great properties. With these excellent properties, perovskite solar...

Kwanchai Penpong · 0 citations
Sep 2026

Studying the impact of different parylene derivatives on perovskite solar cells stability

This study evaluates the effectiveness of parylene derivatives as encapsulation materials for enhancing the stability of perovskite solar cells (PSCs). The research compares four types of parylene (N, C, D, and F) based on their ability to protect perovskite films and prevent PSC degradation under high temperature and...

Kseniia D. Zagorovskaia, O. Trepalin, Pavel A. Somov et al. · 0 citations

We use cookies to run the site and, with your consent, for analytics and to show ads. See our Cookie Policy.