Oct 2026· Science· Vol 394 6822, pp.
eaef9745
· 0 citations· 90 references
Medicine
Abstract
The power conversion efficiency (PCE) and stability of flexible perovskite solar modules (PSMs) are less than those of their rigid devices because surface hydroxyls desorption on flexible substrates, which disrupts self-assembled monolayer (SAM) anchoring and perovskite crystallization. We developed a decoupled SAM-perovskite codeposition strategy that accelerates SAM anchoring by reducing the SAM-perovskite interaction and ameliorates perovskite crystallization. The certified PCE with phenethylammonium iodide as the passivation molecule was 20.2% on PSMs with device areas of 750 cm2. With 1,3-diaminopropane dihydroiodide as the passivator, the PCE of 22.0% for a device area of 14.55 cm2 decreased by 8% after 1044 hours under maximum power point tracking at 85°C and 65% relative humidity. The devices pass all sequences of an international commercialization assessment standard for flexible portable PSMs.
Perovskite/silicon tandem solar cells (PSTSCs) are among the most promising photovoltaic technologies for surpassing the efficiency limits of single-junction solar cells. A major breakthrough in this field has been the introduction of ultrathin hole-selective self-assembled monolayers (HS-SAMs). These molecular interfa...
I. Hajimiri, Hashem Shahroosvand, S. Bellani et al.· Chemical Society Reviews· 0 citations
Self-assembled monolayers (SAMs) are widely used as hole-selective contacts in inverted wide-bandgap (WBG) perovskite solar cells (PSCs). However, incomplete SAM coverage and non-uniform interfacial contact of the SAMs/absorber induce recombination losses and interfacial degradation. Herein, we introduce carbohydrazide...
Ding-Fu Luo, Hao Wang, Tian-Jun Ma et al.· ACS Applied Materials and In...· 0 citations
The performance of self-assembled monolayers (SAMs) in perovskite solar cells (PSCs) is frequently hindered by molecular aggregation, poor interfacial wettability, and high buried-interface defect density. Herein, we introduce 4-carboxyphenylboronic acid (CPBA) as a multifunctional molecular bridge to synergistically e...
Fullerene and its derivatives are widely adopted as electron transport layers (ETLs) in high‐performance perovskite solar cells (PSCs). However, fullerene materials are prone to aggregation and rearrangement under environmental stress, which acts as one of the critical factors restricting the long‐term operational...
Jian Lin, Hao-Nan Wang, Xin-Yi Liu et al.· Advanced Energy Materials· 0 citations
The buried interface in p-i-n perovskite solar cells (PSCs) represents a primary bottleneck to achieve theoretical efficiency limits and long-term operational durability due to severe non-radiative recombination, energy level misalignment, and impeded charge extraction. Self-assembled monolayers (SAMs) have emerged as...
Zhen Chang, Kai Wang, Chang Xu et al.· Chemical Communications· 0 citations
Self-assembled monolayers (SAMs) have emerged as one of the most promising hole-selective materials for inverted perovskite solar cells (PSCs), where their interface regulation capability plays a decisive role in device efficiency and long-term stability. However, conventional small-molecule SAMs suffer from inherent l...
Jia-Qi Huang, Liang-Gen Zhai, Chun-Le Yuan et al.· Chemical Communications· 0 citations
We use cookies to run the site and, with your consent, for analytics and to show ads.
See our Cookie Policy.