Vacuum process for perovskite solar cell for indoor light application
Abstract
Metal-halide perovskite-based materials are attractive for photovoltaic applications because of low-cost production. Moreover, perovskite materials provide good absorption coefficient, low deep trap density, and long charge carrier lifetime, which are great properties. With these excellent properties, perovskite solar cells are good candidates for low-light harvesting. To achieve an appropriate bandgap (Eg) of ~1.80 eV, this thesis focused on designing triple-cation perovskite materials with proper bromide and chloride compositions to effectively absorb indoor light spectra since one sun and low light sources provide different irradiance spectra. With small amounts of photo-generated electrons at indoor condition, minimal recombination is a critical factor. To address the issue, the applications of both antisolvent technique and vacuum thermal annealing process, namely VTA, were investigated in this work to fabricate a superior-quality perovskite film. VTA makes compact, dense, and more robust film. Moreover, trap states at surfaces and grain boundaries, which are sources of carrier losses, are suppressed. With low-cost carbon electrode, we achieved average power conversion efficiency (PCE) of 27.7±2.7% with the highest PCE of 32.0% and average open-circuit voltage (Voc) of 0.93±0.02 V with the highest Voc of 0.96 V under indoor light measurement, significantly more than those from control and vacuum treatment without concurrent heat process. Implication of Thesis: Suggestions for further research This process can be applied to other perovskite compositions to produce high quality perovskite thin films for optoelectronic applications.