Skip to content
Open access

Characterizing immiscible waterflooding in intersecting rough-walled fractures using a phase-field method

Sep 2026 · Frontiers in Marine Science · Vol 13 · 0 citations · 39 references

Abstract

The two-phase displacement in rock fractures is a critical scientific challenge in deep energy development projects, as well as in the safe operation of offshore and nearshore subsurface reservoirs, characterized by the intricate and dynamic flow patterns resulting from the complex fracture geometry and mutual interference between the two-phase fluids. The present study involves the construction of a three-dimensional rough fracture fine model using the fast Fourier transform and the Gaussian distribution method. The phase field-finite element method is employed to simulate the dynamic displacement of water-oil flow and the evolution of the water-oil interface, aiming to investigate the impact of intersection morphology and angle on the water-oil displacement efficiency in rough-walled fractures. The numerical results indicate that fracture intersections are key bottlenecks for fluid flow. The phenomenon of viscous fingering intensifies after the fluid passes through the fracture intersection, making it difficult for the water to form a stable displacement front. The effect of intersection angle on oil displacement is strongly dependent on fracture geometry and does not follow a simple monotonic trend. Small intersection angles generally promote oil displacement in X-shaped fractures, whereas Y-shaped fractures exhibit more complex behavior, with the 120°case showing the lowest water volume fraction. V-shaped intersecting fractures form narrow channels at small intersection angles, which are the main type causing inefficient circulation and residual oil enrichment. Furthermore, fractures with a symmetrical structure and a nearly straight course are more conducive to improving displacement efficiency. Asymmetrical structures and fluid flow into complex fractures are more likely to lead to the accumulation of residual oil. These findings provide a mechanistic basis for multi-scale subsurface flow modeling and can support forecasting-oriented evaluation of preferential pathways, trapping zones, and flow bottlenecks in fractured geological environments.

Read PDF

Similar papers

Oct 2026

Experimental study on the flow behaviour of slickwater in hydraulic fractures using PIV

During hydraulic fracturing of unconventional reservoirs, slickwater entering narrow hydraulic fractures undergoes a complex flow evolution from the near‐wellbore jet region to a fully developed state in the deep fracture; however, its single‐phase flow behaviour within fractures remains insufficiently understood. In...

Jia-Yi Sun, Tao Zhang, Jian Guo et al. · 0 citations
Open access Sep 2026

Study on the Hydraulic Fracture Propagation Mechanism in Deep Coalbed Methane Reservoirs of the Yan’an Gas Field

To address the unclear fracture propagation behavior and the insufficient understanding of the influence mechanisms of fracturing parameters during the hydraulic fracturing of deep coalbed methane reservoirs in the Yan’an Gas Field, Well JY1 in the No. 8 coal seam of the Benxi Formation in Block N was selected as the s...

Ye-Nan Jie, Jin-Qiao Wu, Fengsan Zhang et al. · 0 citations
Open access Oct 2026

Well acoustics in low-permeability formations with hydraulic fractures

This article discusses theoretical approaches for the rapid detection and quantification of damage in an old wellbore using pressure testing and acoustic logging. Acoustic assessment of the quality of hydraulic fractures (HFs) extending radially or obliquely relative to the well axis in low-permeability formations is p...

E. Galiakbarova, Z. Khakimova, R. Bashmakov · 0 citations
Conference Oct 2026

Pore-scale analysis of residual oil occurrence from water flooding in sandstone reservoirs

In response to the problem of highly dispersed remaining oil and the difficulty in accurately assessing the development potential during the high water cut period of Daqing Oilfield, this paper takes a typical sandstone reservoir as the research object. Using micro-micron CT imaging technology, a digital core model wit...

Jin-Mei Shao · 0 citations
Open access Sep 2026

On the Computation of Crack Surface Normals in the Phase‐Field Model of Hydraulic Fracture

Hydraulic fracturing techniques have been used to extract oil from the Earth's crust and to enhance the efficiency of geothermal systems among other applications. Numerical simulation of hydraulic fracturing is essential for predicting the environmental impact of this method, as well as its efficiency in such applica...

Anuj Gupte, E. Polukhov, Marc-André Keip · 0 citations
Open access Sep 2026

Coupled hydromechanical responses around a roadway excavation in inclined coal–mudstone strata

We conduct a numerical investigation into the spatio-temporal evolution of excavation-induced disturbances around roadways in inclined coal–mudstone strata containing fracture networks. The intact rock is modeled using a Mohr–Coulomb plastic constitutive law to capture deformation and failure, while the displacement of...

Chen-Xi Zhao, Fu-Qiang Gao, Q. Lei et al. · 0 citations

We use cookies to run the site and, with your consent, for analytics and to show ads. See our Cookie Policy.