Skip to content
Open access

Well acoustics in low-permeability formations with hydraulic fractures

Oct 2026 · Uchenye Zapiski Kazanskogo Universiteta. Seriya Fiziko-Matematicheskie Nauki · 0 citations · 8 references

Abstract

This article discusses theoretical approaches for the rapid detection and quantification of damage in an old wellbore using pressure testing and acoustic logging. Acoustic assessment of the quality of hydraulic fractures (HFs) extending radially or obliquely relative to the well axis in low-permeability formations is performed based on physical assumptions supported by actual data from HF operations through restored wells. The scanning pulse is taken to be generated in the water-filled annular channel between the solid tubing (ST) and the wellbore wall, with a wavelength greater than the channel radius and exceeding the length of the section with damaged walls or the open section with HFs. The pressure in these sections is assumed to be uniform. The mass and momentum conservation equations, along with the initial and boundary conditions, are formulated. The dispersion equations and the reflection coefficient for the section under investigation are derived analytically. The influence of the damage extent on the amplitude of the reflected signal, depending on the formation permeability and the frequency characteristics of the signal, is examined. The extent of the wellbore wall damage is determined from the pressure buildup curves obtained numerically by solving an integro-differential equation describing the pressure testing of an annular channel with a closed bottom end. The amplitude of the reflected "echo" from the open wellbore section is shown to differ by only 10%, as the inclination angle of the HF relative to the well axis changes. The dynamics of the wave pulse in the problems considered is studied using the Fourier transform.

Read PDF

We use cookies to run the site and, with your consent, for analytics and to show ads. See our Cookie Policy.