Oct 2026· Canadian Journal of Chemical Engineering· 0 citations· 17 references
Abstract
During hydraulic fracturing of unconventional reservoirs, slickwater entering narrow hydraulic fractures undergoes a complex flow evolution from the near‐wellbore jet region to a fully developed state in the deep fracture; however, its single‐phase flow behaviour within fractures remains insufficiently understood. In this study, a visualized experimental system for flat‐plate fractures was established and combined with particle image velocimetry (PIV) to measure the flow field from the near‐wellbore region to the distal fracture region. By quantitatively characterizing the velocity and vorticity fields, the effects of injection rate, slickwater viscosity, fracture width, and perforation configuration on in‐fracture flow‐field development were systematically investigated. The results show that the flow field can be divided into a high‐speed jet disturbance zone, a turbulent transition zone, and a fully developed flow zone. As the fluid moves away from the perforations, velocity non‐uniformity and vorticity fluctuations continuously decrease, perforation‐induced vortices gradually dissipate, and the flow field ultimately stabilizes. Slickwater suppresses spanwise development and mixing and weakens large‐scale vortex structures, thereby promoting downstream flow stabilization, with higher‐viscosity slickwater exhibiting a more pronounced drag‐reduction effect. Higher injection rates, lower viscosity, smaller fracture widths, and single‐perforation injection all increase the flow‐field stabilization distance. Meanwhile, perforation configuration controls flow development mainly by altering local jet velocity, jet–jet interactions, and jet–wall interactions. These results reveal the spatial evolution of single‐phase slickwater flow in narrow hydraulic fractures and provide an experimental basis for investigating proppant–slickwater two‐phase transport in complex fractures and optimizing hydraulic‐fracturing parameters.
To address the unclear fracture propagation behavior and the insufficient understanding of the influence mechanisms of fracturing parameters during the hydraulic fracturing of deep coalbed methane reservoirs in the Yan’an Gas Field, Well JY1 in the No. 8 coal seam of the Benxi Formation in Block N was selected as the s...
Rock fracturing at a certain depth in the subsurface is caused by the weight of overlying strata and elevated fluid pressure in confined formations. It produces tensile fractures, with fracture walls moving against fluid pressure. Given that an individual fracture can form in a short time, capturing the dynamic process...
Yun-Tao Liu, Jian Yang, J. Min et al.· Processes· 0 citations
Hydraulic fracture propagation directly affects stimulation efficiency in low-permeability unconventional reservoirs and is influenced by in situ stress, fluid injection, and bedding structure. In this study, a coupled hydro-mechanical phase-field model was developed by combining solid mechanics, porous media flow, and...
In this study, a transient three‐dimensional numerical model is developed. The model employs large eddy simulation (LES) to resolve unsteady turbulent flows, the Smagorinsky–Lilly model to resolve sub‐grid scale structures, and the volume of fluid (VOF) method to track the motion of three continuous phases (air, slag...
Wen-Jie Zhang, Zhi-Xiao Zhang, Xiang-Long Li et al.· Steel Research International· 0 citations
: Hydraulic fracturing in tight conglomerate reservoirs is strongly influenced by the heterogeneous gravel structure through which fractures propagate, yet conventional fracture-flow descriptions generally assume planar pathways and therefore cannot adequately represent the resulting transport behavior. To address this...
Hai-Zheng Jia, Jing-Feng Dong, Peng Xu et al.· Fluid Dynamics & Materia...· 0 citations
We use cookies to run the site and, with your consent, for analytics and to show ads.
See our Cookie Policy.