Skip to content

One-Step Preparation of a Self-Standing LiFePO4 Cathode with an In Situ SiO2 Coating via Modified Coaxial Electrospinning for Advanced Lithium-Ion Batteries.

Oct 2026 · ACS Applied Materials and Interfaces · 0 citations · 58 references
Medicine

Abstract

LiFePO4 cathodes have gained much attention for Li-ion batteries due to their superior electrochemical and economic features. However, their practical applications are limited by poor electronic conductivity, sluggish lithium-ion diffusion, and unstable cathode/electrolyte interfaces. Conventional approaches require separate electrode fabrication and surface coating steps, increasing process complexity. Herein, a modified coaxial electrospinning method was developed to prepare a free-standing LiFePO4 cathode with a simultaneous in situ SiO2 coating. The core solution consists of LiFePO4 and polyacrylonitrile, while the shell solution consists of ethanol and tetraethyl orthosilicate. The modified coaxial electrode (CE-LFP@SiO2) exhibits a more uniform and smaller average fiber diameter (200 nm) compared to the single electrospinning electrode (E-LFP). Results confirm the formation of a thin SiO2 surface coating. The discharge capacity at 0.1 C reaches 166.3 mAh g-1, compared with 160.0 mAh g-1 for E-LFP and 150.0 mAh g-1 for a conventional LiFePO4 electrode (LFP). CE-LFP@SiO2 provides a capacity retention of 89% after 300 cycles, compared with 78 and 74% for E-LFP and LFP, respectively. The lithium-ion diffusion coefficient increases to 4.70 × 10-13 cm2 s-1, compared with 5.43 × 10-14 cm2 s-1 for LFP. This work demonstrates a simple one-step strategy for simultaneously fabricating and coating free-standing LiFePO4 cathodes.

View source

Similar papers

Open access Oct 2026

Fabrication of Homogeneous Nanometer-Thin Artificial CEI on LNMO by Suspension Coating of Niobate Nanosheets.

Lithium-ion batteries (LIBs) require stable high-voltage cathode materials to meet escalating energy storage demands. LiNi0.5Mn1.5O4 (LNMO) offers high energy density while employing earth-abundant manganese but suffers from degradation due to manganese dissolution and electrolyte decomposition at elevated voltages. Th...

Nashmiya Basheer, Ingmar Pietsch, Max Stevenson et al. · 0 citations
Oct 2026

Enhanced Conductivity, Electrochemical Performance, and Chemical Stability of Lithium-Ion Batteries Based on Electrospun Polyacrylonitrile Hybrid Membrane

Replacing liquid electrolytes with solid ones is regarded as an essential strategy to mitigate safety concerns in lithium-ion batteries. However, the lower ionic conductivity of solid polymer electrolytes (SPEs) compared to conventional liquid electrolytes still hinders their practical application. In this work, we p...

Yu-Hua Guo, Jia-Li Qiu, Wei-Fu Sun · 0 citations
Oct 2026

Spontaneous Formation of a Li–Al Oxide Coating Layer on Ni-Rich Positive Electrode Materials and Improvement of Electrochemical Performance

Surface coating with a lithium-ion conductor is an effective strategy for improving the electrochemical performance of positive electrode materials for lithium-ion batteries. However, preparing a uniform coating by a simple, cost-effective, and solvent-free process remains challenging. Here, we show that simply mixin...

Yuki Koshika, Haruki Kaneda, Yuki Furuichi · 0 citations
Sep 2026

Formation and Electrochemical Role of an Ultrathin Compositionally Complex Interfacial Layer on O3-Type Layered Cathodes

Sodium-ion batteries (SIBs) have emerged as promising alternatives for large-scale energy storage owing to the abundance and low cost of sodium. However, layered oxide cathodes suffer from severe surface degradation and irreversible phase transitions during high-voltage cycling, limiting their electrochemical perform...

S. Gong, In Soo Kim, M. Cho et al. · 0 citations
Sep 2026

In Situ Deposition of SiO x /C on Graphite with Prelithiation as an Anode for Lithium-Ion Batteries

Unsaturated silicon oxide (SiOx) as one of the anode materials for lithium-ion batteries (LIBs) shows relatively high specific capacity, but its overall electrochemical performances remain to be improved. Herein, a facile synthetic approach is developed to deposit SiOx and amorphous carbon on spherical graphite parti...

Hao-Yang Tong, Min Zhong, Wen-Zhuo Shen et al. · 0 citations
Conference Open access 2026

Melamine-Based Polyimide Covalent Organic Framework: A High-Performance Cathode Material for High-Temperature Lithium-Ion Batteries

To address the issues of poor thermal stability, rapid capacity decay, and low safety of traditional inorganic lithium-ion battery cathode materials under high-temperature conditions, this paper develops a polyimide covalent organic framework (PI-COF) cathode material based on melamine and 1,4,5,8-naphthalenetetracarbo...

Yuan-Yuan Zhu, Guang-Xu Yang, Xi-Feng Yu et al. · 0 citations

We use cookies to run the site and, with your consent, for analytics and to show ads. See our Cookie Policy.