Enhanced Conductivity,
Electrochemical Performance,
and Chemical Stability of Lithium-Ion Batteries Based on Electrospun
Polyacrylonitrile Hybrid Membrane
Oct 2026· Industrial & Engineering
Chemistry Research· 0 citations· 35 references
Abstract
Replacing liquid electrolytes with solid ones is regarded as an essential strategy to mitigate safety concerns in lithium-ion batteries. However, the lower ionic conductivity of solid polymer electrolytes (SPEs) compared to conventional liquid electrolytes still hinders their practical application. In this work, we propose a composite polymer electrolyte (CPE) by incorporating a poly(ethylene oxide) (PEO) matrix with high-content lithium bis(trifluoromethanesulfonyl)imide (LiTFSI) into an electrospun polyacrylonitrile (PAN)-based three-dimensional nanofiber framework. Active fillers of LLZTO nanoparticles and LiClO4 were further introduced into the PAN skeleton to construct additional ion-conducting pathways (designated as PLLP). This design of coembedding dual active fillers inside the electrospun nanofibers, rather than simply dispersing them in the PEO matrix, is distinct from conventional CPEs and provides continuous and fast-ion channels. The morphology and diameter distribution of electrospun fibers were optimized by varying PAN concentration. Consequently, the optimized PLLP composite electrolyte achieves a superior ionic conductivity of 1.12 × 10–4 S cm–1 at 30 °C, an electrochemical stability window up to 4.75 V, and a lithium-ion transference number of 0.53, which is substantially higher than those of conventional PEO-based electrolytes. Moreover, the LiFePO4/PLLP/Li solid-state battery delivers a high specific discharge capacity of 161 mAh g–1 at 60 °C at 0.5C after 95 cycles with a capacity retention of 96%, as well as excellent rate capability. These results demonstrate that the synergistic coupling of active fillers and a 3D electrospun framework provides an effective strategy for simultaneously enhancing ionic conductivity, electrochemical stability, and cycling performance in all-solid-state lithium batteries.
Developing safe and high-energy solid-state lithium metal batteries (LMBs) remains challenging due to the need to simultaneously achieve ultrathin electrolyte membranes, fast ion transport, and mechanical robustness. Herein, we report a scalable 19 μm composite electrolyte based on a porous PTFE scaffold, a PEO/LiTFSI...
PEO-based solid-state electrolytes (PSEs) suffer from insufficient mechanical strength, low ionic conductivity, and poor interfacial stability, which severely undermines their feasibility for practical applications. The conventional approach of adding plasticizers to enhance ionic conductivity is often accompanied by...
Biao Huang, Yong-Cheng Chen, Xin-Yi Zhou et al.· ACS Applied Energy Materials· 0 citations
Poly(ethylene oxide) (PEO)-based solid polymer electrolytes suffer from low ionic conductivity and limited Na+ transport capability, which restrict their application in solid-state sodium metal batteries. Herein, a Na+-coordinating filler (Al2O3@KHMF) is prepared by grafting organic chains onto the Al2O3 surface thro...
Shu-Wei Wang, Jing-Qun Wen, Fan-Hao Zeng et al.· ACS Applied Energy Materials· 0 citations
Solid and quasi-solid polymer electrolytes have been widely investigated for lithium batteries because of their enhanced safety and potential compatibility with high-energy-density systems. Nevertheless, practical application remains constrained by limited ion transport, insufficient electrode/electrolyte contact, and...
Xi Li, Qiu-Qi Sun, Zhen-Guo Wang et al.· Chemical Communications· 0 citations
Cellulose nanofibers (CNFs) are emerging as sustainable polymer matrices for gel-polymer electrolytes; however, their ion-transport properties are limited by surface-chemistry-derived interactions. In this work, we demonstrate that a single, time-controlled APTES functionalization step provides an effective and scalabl...
Susithra Sureshkumar, Donghyuck Park, A. Ellis et al.· Small· 0 citations
Solid‐state lithium metal batteries are promising next generation energy storage devices and composite solid electrolytes (CSEs) with high ionic conductivity and mechanical stability have attracted widespread attention. However, the slow ion transport kinetics at the heterogeneous interface between ceramic fillers and...
Kan Zhao, Lin Li, Bo Wang et al.· Advanced Functional Material...· 0 citations
We use cookies to run the site and, with your consent, for analytics and to show ads.
See our Cookie Policy.