DRIFT-Net is presented, a DRive-state-aware Weighted Interpolation for error Forecasting and Trajectory correction Network, to improve dead-reckoning-based vehicle localization and achieves improved performance compared with existing methods.
Abstract
Accurate vehicle localization is essential for autonomous driving. However, vehicle position estimation becomes challenging when localization information from sensors such as the Global Navigation Satellite System (GNSS) and Light Detection and Ranging (LiDAR) is unavailable, degraded, or unreliable. In such situations, dead reckoning can provide continuous localization, but accumulated yaw estimation errors often result in significant position error. To address this issue, this paper presents DRIFT-Net, a DRive-state-aware Weighted Interpolation for error Forecasting and Trajectory correction Network, to improve dead-reckoning-based vehicle localization. DRIFT-Net employs a Convolutional Neural Network–Long Short-Term Memory (CNN–LSTM) architecture to extract driving features and incorporates an expert layer that performs state-based weighted interpolation of expert predictions to estimate yaw error. A Kalman filter is subsequently applied to suppress noise and refine the final vehicle position estimate through smoothing. Experimental results in low-speed and high-speed driving scenarios demonstrate that the proposed approach improves localization accuracy. The proposed method achieved yaw Root Mean Square Error (RMSE) values of 0.339 deg and 0.148 deg in the respective scenarios, confirming improved performance compared with existing methods.
A CNN-GRU fusion-based method for correcting positioning jumps, meeting the real-time requirements for future autonomous driving localization, and justifying the use of inertial measurement unit (IMU) time-series data for anomaly prediction is proposed.
Ming-Yang Deng, Guang-Jiao Chen· Italian National Conference...· 0 citations
Accurate and reliable localization is essential for the safe deployment of intelligent vehicles (IVs). Global navigation satellite system (GNSS)/inertial measurement unit (IMU) fusion based on Bayesian filtering remains the most practical solution due to its low cost and broad applicability. However, classical filterin...
Cao Chen, Hao Zhu, H. Leung· IEEE Transactions on Instrum...· 0 citations
Low-cost inertial and barometric sensing offers an autonomous route to three-dimensional (3D) positioning when global navigation satellite system (GNSS) signals are unavailable or unreliable. In long-duration pedestrian dead reckoning, however, displacement error, heading drift, altitude drift, and local trajectory-sha...
Shi-Zheng Wang, Hong-Qi Gao, Xiang-Yang Ma et al.· 0 citations
Achieving reliable vehicle localization in GNSS outage environments is a critical challenge. Traditional Dead Reckoning (DR) systems using low-cost Micro-Electro-Mechanical Systems (MEMS) Inertial Measurement Units (IMUs) inevitably suffer from rapid error accumulation. This paper proposes an uncertainty-aware deep kin...
In environments where global navigation satellite system (GNSS) signals are unavailable or unreliable, inertial measurement unit (IMU)-based pedestrian dead reckoning (PDR) offers considerable potential because it operates independently of external infrastructure. However, maintaining stable and accurate positioning ac...
Guo-Wei Liang, Hong-Yu Wu, Si-Qi Bai et al.· Italian National Conference...· 0 citations
The results demonstrate that the proposed method effectively improves the estimation accuracy of longitudinal velocity and sideslip angle, as well as the environmental adaptability of the vehicle.
Zi-Xian Li, Yao-Wen Zhang, Yu Sun et al.· Metrology and Measurement Sy...· 0 citations
We use cookies to run the site and, with your consent, for analytics and to show ads.
See our Cookie Policy.