Oct 2026· Metrology and Measurement Systems· Vol 33, pp. 1-22· 0 citations· 36 references
TL;DR
The results demonstrate that the proposed method effectively improves the estimation accuracy of longitudinal velocity and sideslip angle, as well as the environmental adaptability of the vehicle.
Abstract
To enhance the accuracy and reliability of state estimation for distributed electric drive vehicles in GNSS-denied and complex terrain environments, this paper innovatively proposes a multi-source information-based state fusion estimation method. The core of the method is a dichotomy based hybrid model data state fusion framework designed to address dual uncertainties in both GNSS signal and terrain. First, a vehicle dynamics model based Cubature Kalman Filter (CKF) is designed. Second, to tackle model mismatch in complex terrain, a vehicle state estimation method based on a Convolutional Neural Network (CNN) and Long Short Term Memory (LSTM) network is proposed. In this approach, the CNN is responsible for terrain type recognition, while the LSTM serves as the backbone network to extract nonlinear correlated features from eight types of time series data and compute the model output. Then, to improve the reliability of the estimation algorithm and reduce errors from any single method, a physics-informed trend reference is introduced, which operates independently of absolute ground truth. Using dichotomy logic, the weights of the CKF-based estimate and the CNN-LSTM-based estimator are dynamically adjusted in real time by comparing their respective deviations from this reference. To validate the effectiveness of the proposed method, experiments under four operating conditions were carried out on an eight wheel distributed electric drive vehicle. The results demonstrate that the proposed method effectively improves the estimation accuracy of longitudinal velocity and sideslip angle, as well as the environmental adaptability of the vehicle.
DRIFT-Net is presented, a DRive-state-aware Weighted Interpolation for error Forecasting and Trajectory correction Network, to improve dead-reckoning-based vehicle localization and achieves improved performance compared with existing methods.
With the rapid development of intelligent transportation and autonomous driving technologies, vehicle trajectory prediction, as a key task for ensuring traffic safety and efficiency, has become a crucial link in improving the decision-making performance of autonomous vehicles. To address the issue that traditional su...
Yi-Peng Li, Ling Han· Proceedings of the Instituti...· 0 citations
. Against the backdrop of the rapid development of artificial intelligence and sensor technology, autonomous driving technology is gradually moving from the laboratory to reality. However, due to the complex and uncertain changes of the real environment (extreme weather, signal blockage, dynamic interference, etc.), it...
Xing-Rui Dong, Shao-Zu Han, Ming-Yang Zhang· Proceedings of the 3rd Inter...· 0 citations
This paper presents a novel fusion estimation framework that integrates credibility-based Kalman filtering with Long Short-Term Memory (LSTM) networks to address uncertain dynamic model parameters in low-altitude target tracking. First, the iterative formulation of a Cubature Kalman Filter (CKF) is reformulated to enab...
Quan-Bo Ge, Yi-Chang Cao, Kai Lin et al.· IEEE Transactions on Automat...· 0 citations
Reliable centimeter-level position measurement is essential for advanced autonomous driving. In complex urban environments, if the Global Navigation Satellite System (GNSS) fails to operate, C-V2X cooperative positioning provides a reliable alternative solution, but it faces limitations such as channel confusion and ph...
In heavy-duty shipbuilding, the efficient transfer of ship blocks directly affects the overall construction schedule, while reliable identification of the lifting and dropping states of transport vehicles is essential for updating block locations. However, vehicle vibration, road disturbances, and local sensor anomalie...
Wen-Cheng Ding, Xiao-Wei Jiang, Tong-Zhou Liu et al.· Measurement science and tech...· 0 citations
We use cookies to run the site and, with your consent, for analytics and to show ads.
See our Cookie Policy.