Skip to content

Impact of genetic modifications in starch biosynthesis on 3D printing performance of rice starches.

Aug 2026 · Food Chemistry · Vol 526, pp. 150774 · 0 citations · 71 references
Medicine

Abstract

Starch gels with favorable rheological properties are promising for 3D printing, but native starch often requires modification, and traditional physical or chemical methods may pose safety and food applicability concerns. In this study, we investigated the effects of gene modification in starch biosynthesis on gel microstructure, rheological behavior, and 3D printing performance of rice starch. Six rice starch samples with varying genotypes and molecular structures were selected to prepare starch gels retrograded for 1 h, 1 day, and 7 days. Knockout of starch branching enzyme IIb (BEIIb) increased amylose content (>30%), resulting in starch gels with smaller pore area/fraction, and correlation length (∼20-40 Å) and structural radii of the semicrystalline units, and faster recrystallization, but lower yield stress (<20 Pa) and shear recovery (∼30%-60%) during extended retrogradation, yielding optimal mid-term but limited long-term printability compared to the other three starch samples. In samples with intact BEIIb, the SSIIaTT genotype increased fa chain content (27%-28%), thereby improving pore fraction, correlation length (∼35-55 Å) and structural radii, delaying B-type crystallization, and presenting the best initial and long-term printability. In contrast, the SSIIaGC genotype had higher fb1 chain content (52%), yield stress (∼60-120 Pa), and consistency index (∼40-85 Pa·sn), but low pore area/fraction values, supporting good mid-term printability. These results indicate that both amylose content and amylopectin fine structure significantly affect starch printability. This genetic approach offers a sustainable, precise, and cost-effective solution for optimizing starch materials for 3D printing.

View source

Similar papers

Open access Sep 2026

Cassava starch enhances the printability and swallowability of rapeseed protein gels for 3D-printed dysphagia foods

Plant-based proteins have attracted increasing attention in the development of easy-to-swallow foods and three-dimensional printing (3DP) materials due to their excellent nutritional properties. However, the disordered arrangement of protein molecular chains in rapeseed protein (RP) results in insufficient structural s...

Yu-Xin Zhang, Jing-Ru Dong, Yi-Ke Su et al. · 0 citations
Review Open access Aug 2026

Engineering Starch for Non-Food Additive Manufacturing: Properties, Printability, and Emerging Uses

The development of sustainable materials for additive manufacturing (AM) has positioned starch as a compelling alternative to conventional thermoplastics. However, the successful implementation of starch in 3D printing (3DP) relies on precise control of its supramolecular organization, rheological behavior, and process...

Quentin De Roover, Shunshun Zhu, Aurore Richel · 0 citations
Open access Sep 2026

Structure-dependent modulation of potato and corn starch gelatinization and retrogradation by Salecan

Starch retrogradation is a critical technological challenge requiring effective mitigation. This study aimed to systematically compare how Salecan, a novel food-grade linear anionic glucan, differentially modulates gelatinization and retrogradation of potato starch (PS) and corn starch (CS) based on structural differen...

Wan-Ping Xiong, Li-Xian Hu, Cheng Ni et al. · 0 citations
Open access Sep 2026

Comparative Characterization of the Multiscale Structure, Physicochemical Properties, and In Vitro Digestibility of Starches from Selected Stress-Resistant Rice Varieties

Stress-resistant rice varieties are valuable for sustainable production and rice-based food development. Six rice varieties selected for salt alkali tolerance or low cadmium accumulation were characterized for starch composition, multiscale structure, physicochemical properties, rheological behavior, and in vitro diges...

Dan-Dan Qin, Ling-Feng Zhu, Hong-Yan Yuan et al. · 0 citations
Review Open access Sep 2026

Starches in Extruded and Processed Foods

This review aims to provide a comprehensive and critical analysis of extrusion as a sustainable technology for starch modification. Specifically, it addresses how extrusion processing alters the structural, physicochemical, and functional properties of starch from different botanical sources, and how processing paramet...

F. C. Pacheco, A. F. C. Pacheco, P. H. C. Paiva · 0 citations
Oct 2026

Multi-scale structure, physicochemical properties, and structure-property relationships of chayote tuber starch: A comparison with potato starch.

Chayote tuber starch (CTS) is a promising unconventional starch resource, yet its structural features and functional properties remain insufficiently characterized. In this study, the structural characteristics and physicochemical and functional properties and in vitro digestibility of chayote tuber starch (CTS) were s...

Xiao-Xue Wang, Ying Chen, Si-Yu Xu et al. · 0 citations

We use cookies to run the site and, with your consent, for analytics and to show ads. See our Cookie Policy.