Skip to content
Open access

Improved Forest Parameter Estimation Using Registered Airborne–Terrestrial Point Clouds via a Novel Adaptive Clustering and Vertical Layering Method

Nov 2026 · Remote Sensing · Vol 18, pp. 3784 · 0 citations · 48 references

Abstract

Diameter at breast height (DBH) and tree height are core parameters for forest monitoring. LiDAR enables rapid high-precision point cloud acquisition, yet single-platform data have limitations: airborne laser scanning (ALS) cannot capture sub-canopy structure, while terrestrial laser scanning (TLS) cannot fully acquire canopy information. Based on 92 plots in Guangxi, this study proposes a weighted point-to-normal iterative closest point (WPN-ICP) registration algorithm for high-precision fusion of ALS and TLS point clouds, with comparisons to trimmed iterative closest point (TrICP) and iterative closest point (ICP). An adaptive density-based spatial clustering of applications with noise (DBSCAN) algorithm was developed for diameter at breast height (DBH) estimation, and a DBH cluster-based vertical layering method (DCVL-THE) for tree height estimation. Three segmentation-based methods—canopy height model (CHM), region growing (RG), and comparative shortest path (CSP)—were selected for comparison. WPN-ICP achieved a mean MAE of 0.0359 m, with reductions of 85.87%, 69.03%, and 73.00% compared with coarse registration, TrICP, and ICP. Using the fused point cloud, DBH estimation achieved an RMSE of 0.6326 cm with an RRMSE of 5.18%, and tree height estimation achieved an RMSE of 0.7160 m with an RRMSE of 6.58%. Compared with the suboptimal CSP method, the RMSE and RRMSE for DBH were reduced by 41.79% and 41.68%, and for tree height by 25.66% and 25.68%. This method does not require full individual-tree or crown segmentation, thereby avoiding the error propagation associated with such segmentation and enabling accurate stand-scale estimation.

Read PDF

Similar papers

Open access Nov 2026

TLS-ULS point cloud registration in natural forests using hybrid semantic triangle matching and vertical structure weighting

Establishing initial geometric correspondences between terrestrial laser scanning (TLS) and unmanned aerial vehicle laser scanning (ULS) forest point clouds is difficult under cross-platform observations. Fine registration is vulnerable to local non-rigid canopy deformation caused by canopy disturbance and platform-dep...

Ji-Ming Lai, Yun-Cheng Deng, Cheng Wang et al. · 0 citations
Open access Sep 2026

Accuracy assessment of terrestrial laser scanning for estimating tree height, diameter at breast height, crown dimensions, and aboveground biomass

Terrestrial laser scanning (TLS) provides dense three-dimensional observations of forest structure and has the potential to complement or replace labor-intensive conventional measurements for selected tree attributes. This study establishes an accuracy-assessment framework for estimating tree height, diameter at breast...

Hacı Murat Yılmaz · 0 citations
Open access Oct 2026

Forest Canopy Height Estimation Based on TECIS Multi-Angle Data and a Novel Discrete CHM Dataset Derived from GF-7 and GEDI

Forest canopy height (FCH) is a key parameter for estimating forest aboveground biomass (AGB) and carbon storage. The integration of GEDI relative height products and single-angle imagery has been widely applied in FCH estimation. However, GEDI geolocation errors and the canopy underestimation of traditional single-ang...

Yang Bai, Qiang Wang, Lu-He Wan et al. · 0 citations
Review Open access Oct 2026

Estimation of Individual-Tree Volume in Subtropical Plantation Forests Based on Ultra-High Density Unmanned Aerial Laser Radar

Understanding current forest resource status is fundamental for formulating forestry policies and management plans. 3D laser scanning provides an effective approach for conducting forest resource surveys efficiently and accurately, which is the core background and aim of this study. This research used Unmanned Aerial V...

Yong-Wei Wu, Yi-Ming Zhang, Kai Su et al. · 0 citations
Oct 2026

Influence of geolocation misalignment on airborne laser scanning-based forest biomass model calibration in structurally complex mixed forests

Accurate alignment between forest inventory plots and corresponding airborne laser scanning (ALS) point clouds is critical for reliable area-based model calibration and biomass estimation; however, geolocation misalignment remains a significant challenge in structurally complex mixed forests. In this study, we invest...

Xin-Yuan Wei, D. Hayes, Gregory McHale et al. · 0 citations
Open access 2026

Quantifying the Effect of Topographic Normalization on Airborne LiDAR-Derived Individual Tree Parameters: A Unified Theoretical–Experimental Framework

Airborne light detection and ranging (LiDAR) is widely used to retrieve individual tree parameters (ITPs), including tree height (TH), crown base height (CBH), crown length (CL), and crown volume (CV). However, pointwise topographic normalization over sloping terrain may deform crown geometry and introduce systematic b...

S. Nie, Cheng Wang, X. Xi et al. · 0 citations

We use cookies to run the site and, with your consent, for analytics and to show ads. See our Cookie Policy.