Skip to content
Open access

Quantifying the Effect of Topographic Normalization on Airborne LiDAR-Derived Individual Tree Parameters: A Unified Theoretical–Experimental Framework

2026 · IEEE Transactions on Geoscience and Remote Sensing · Vol 64, pp. 5704326-5704326 · 0 citations · 60 references

Abstract

Airborne light detection and ranging (LiDAR) is widely used to retrieve individual tree parameters (ITPs), including tree height (TH), crown base height (CBH), crown length (CL), and crown volume (CV). However, pointwise topographic normalization over sloping terrain may deform crown geometry and introduce systematic bias. This study develops a first-order, geometry-based analytical framework to quantify topographic normalization-induced biases in TH, CBH, CL, and geometry-defined CV. Using idealized crown geometries and a crown-scale planar terrain approximation, the derived equations relate parameter-specific biases to local terrain slope, equivalent crown radius, crown angle, and crown type. The framework was evaluated using 3000 simulated trees and two airborne LiDAR datasets with contrasting forest structures and point densities. The results showed that topographic normalization generally underestimated CBH and overestimated TH, CL, and CV. Bias magnitude increased with terrain slope and crown radius and generally decreased with crown angle, with responses varying among crown types. The simulated point clouds showed close agreement with the analytical predictions under the prescribed geometric conditions. In both real datasets, the directions and variations of the observed errors were broadly consistent with the predicted normalization-induced bias patterns under the evaluated conditions. Point density analysis showed that sparse sampling reduced agreement with continuous-surface predictions, whereas denser sampling more completely represented crown extrema and boundaries. The analytical relationships were further formulated as a postnormalization correction module without modifying upstream LiDAR processing. The framework estimates the geometric component of topographic normalization-induced error and is most applicable to reliably segmented trees with compact, approximately axisymmetric crowns on locally planar terrain. Greater caution is required for irregular or overlapping crowns, nonplanar terrain, and CV estimation.

Read PDF

We use cookies to run the site and, with your consent, for analytics and to show ads. See our Cookie Policy.