Skip to content
Open access

Experimental, Numerical, and Analytical Model of the Meso‐Mechanical Behavior of Linear Low‐Density Polyethylene Plastic and Sand Composite

Oct 2026 · Engineering Reports · Vol 8 · 0 citations · 50 references

Abstract

Reusing plastic waste in construction materials offers a sustainable way to reduce environmental pollution; however, the low stiffness of recycled plastics limits their structural use. This study investigates the compressive behavior and elastic modulus of waste linear low‐density polyethylene (LLDPE) composites reinforced with sand at high volume fractions, focusing on construction applications that require deformation control. Composite specimens containing sand volume fractions of 0.34, 0.52, and 0.62 were fabricated and tested under uniaxial compression. A three‐dimensional mesoscale finite element model based on representative volume elements (RVEs) was developed to predict the effective elastic modulus and evaluate mesoscale deformation and load‐transfer mechanisms between the LLDPE matrix and sand particles. Experimentally, increasing the sand volume fraction from 0.34 to 0.62 increased the elastic modulus from 216.9 to 1683.3 N/mm2, demonstrating substantial stiffness enhancement, although ductility and toughness decreased with increasing sand content. Numerical predictions showed excellent agreement with experimental results, achieving a coefficient of determination (R2) of 0.99 and an average absolute error (AAE) of 1.11% across the investigated compositions. Mesoscale strain analysis further showed that increasing sand content reduced deformation localization within the LLDPE matrix, indicating enhanced load sharing and matrix constraint by the rigid sand particles. In addition, we proposed a modified analytical model to improve elastic modulus prediction at high filler contents, where classical analytical models show significant deviation. The proposed analytical model achieved an average AAE of 4.25% and provided substantially improved predictions compared with the classical models examined. The study's novelty lies in integrating experimental testing, validated three‐dimensional mesoscale modeling, and a modified analytical formulation for high‐volume waste LLDPE–sand composites containing up to 62% sand by volume. This combined experimental, numerical, and analytical framework provides a reliable approach to the design and development of sustainable waste‐plastic–mineral composites for selected nonstructural construction applications.

Read PDF

Similar papers

Open access Oct 2026

Flexural Behavior of Structural Foam Concrete with Hollow Polymer Spherical Fillers Under Thermal and Mechanical Loading: Numerical and Experimental Analysis

Creating low-density composite materials that can handle significant temperature changes and bending stress is a promising approach for building floating platforms. This study creates a numerical model and conducts an experimental analysis of foam concrete containing polymer spheres with different diameters and propert...

A. Beskopylny, I. Panfilov, D. Shakhalieva et al. · 0 citations
Open access Sep 2026

Finite element evaluation of the structural and thermal integrity of a traffic cone made from densified low-density polyethylene and expanded polystyrene

The growing volume of plastic waste has prompted research into densified plastic as an alternative construction material. Its mechanical and physical properties should be evaluated to determine its suitability for specific applications. In this study, low-density polyethylene (LDPE) and expanded polystyrene (EPS) were...

Michelle D. Enriquez, Mary Glen L. Caugma · 0 citations
Open access 2026

Optimization of mechanical and thermal properties of hybrid lightweight aggregate foam concrete using central composite design

This study addresses the development and improvement of foam concrete using a hybrid lightweight aggregate that includes natural lightweight aggregate (locally called Ponza), expanded clay (Leca), and expanded polystyrene (EPS), aiming to achieve a balance between mechanical properties and thermal performance while mai...

Ghasak A. Mohammed, A. Hilal · 0 citations
Sep 2026

Computational Evaluation of Stiffness and Toughness in MWCNTReinforced Polymer Nanocomposites

The rising demand for lightweight, high-performance nanocomposites has driven the search for reliable computational methods that not only predict material behavior but also reduce experimental costs and development time. Experiments on polymer nanocomposites, apart from being costly, are also very time-consuming, w...

Umang B. Jani, Bhavik A. Ardeshana, Ajay M. Patel et al. · 0 citations
Conference Open access Oct 2026

Finite Element Analysis Of High-strength Concrete-filled Steel Tubular Columns Under Eccentric Compression

This study presents a numerical investigation of the compressive and flexural behavior of short circular concrete-filled steel tubular (CFST) columns composed of high-strength materials under eccentric loading. A total of 27 specimens were analyzed using three-dimensional nonlinear finite element models developed in Ab...

H. D. Phan, Đạt Văn Dương, Hai Tran · 0 citations
Open access Dec 2026

Bending behavior analysis of reinforced concrete beams using recycled aggregate particles by the finite element method

The flexural behavior of reinforced concrete beams using recycled lightweight aggregate concrete (RLWAC) is significantly influenced by the mechanical properties of the concrete and the bond mechanism between the rein - forcement and the concrete. This paper presents the results of a study on the flexural behavior of R...

N. L. Le, T. Vu, Hien Pham Thi · 0 citations

We use cookies to run the site and, with your consent, for analytics and to show ads. See our Cookie Policy.