Sep 2026· Journal of Clinical and Experimental Dentistry· Vol 18, pp. e1164 - e1172· 0 citations· 13 references
Medicine
TL;DR
Post-curing time influenced the physicomechanical properties of 3D-printed resins intended for permanent restorations, with the response depending on the material and property evaluated.
Abstract
Background Three-dimensional (3D)-printed resins intended for permanent restorations represent a promising alternative to conventional restorative materials. Although the effect of post-curing duration on these materials has already been investigated, material-specific evidence for some recently developed resins remains limited. This study aimed to evaluate the effect of different post-curing times on the surface microhardness, flexural strength, and fracture resistance of these resins. Materials and Methods An in vitro experimental study was conducted using three 3D-printed resins (VarseoSmile TriniQ, Prizma 3D Bio Crown Diamond, and Prizma 3D Bio Crown) and a CAD/CAM nanohybrid resin (Evolux Hybrid) as the reference group. The printed resins were subjected to three post-curing times: Half the manufacturer-recommended time, the recommended time, and twice the recommended time. Surface microhardness, flexural strength, and fracture resistance were evaluated. Data were analyzed using two-way analysis of variance and the Bonferroni post hoc test (α=0.05). Results Material type, post-curing time, and their interaction significantly affected the physicomechanical properties evaluated (p<0.05). For VMH, the highest values were recorded for Bio Crown Diamond-T3 and VarseoSmile TriniQ-T3, at 23.59 ± 1.58 and 23.47 ± 1.17, respectively, with no significant difference between them. VarseoSmile TriniQ-T3 exhibited the highest flexural strength and fracture resistance values, reaching 128.14 ± 11.35 MPa and 933.14 ± 20.77 N, respectively. Bio Crown showed the lowest values for all three properties evaluated. Conclusions Post-curing time influenced the physicomechanical properties of 3D-printed resins intended for permanent restorations, with the response depending on the material and property evaluated. VarseoSmile TriniQ exhibited the highest flexural strength and fracture resistance. In contrast, Bio Crown Diamond achieved surface microhardness comparable to that of VarseoSmile TriniQ only after post-curing for twice the recommended duration.
Objectives: This study investigated the effect of post-curing time on the color stability of a non-polished, as-printed hybrid 3D printed resin material and assessed whether a nitrogen atmosphere during post-curing has any influence.
Methods: The 3D-printed specimens were divided into four groups based on the post-curi...
Nisrine Khneisser, L. Hardan, Z. Salameh et al.· International Arab Journal o...· 0 citations
Aim: This study aimed to evaluate the effects of the material type and immersion solution on the color stability (ΔE) and surface roughness change (ΔRa) of provisional dental materials fabricated using subtractive milling or additive 3D printing techniques. Materials and Methods: Three provisional restorative materials...
W. Ahmed, Amr Ahmed Azhari, B. N. Alturki et al.· Journal of Functional Biomat...· 0 citations
Although 3D‐printing has been increasingly integrated in the fabrication of provisional restorations, the evidence regarding the impact of different polishing regimens on their topographical features is unclear. This in vitro study assessed the outcomes of different polishing treatments on roughness measurements of 3D‐...
Yousif A. Al-Dulaijan, Abdulrahman Mohammad Aldossari, Abdulrahman Salem Bin-Jabair et al.· International Journal of Den...· 0 citations
The aim of this study was to evaluate the effect of storage-induced aging on the dimensional stability of two 3D printed resins, a plant-based and a conventional dental model resin. Sixteen dental models were fabricated from a maxillary typodont CAD reference file using two resin types (n = 8 each): a conventional resi...
M. Sadoon, A. al-Omari, O. A. Sheet· Dentistry 3000· 0 citations
Surface roughness of 3D printed DBR and denture teeth decreased after polishing and coatings, and coating using OG resin improved the hardness of DBR and denture teeth.
Yousif A. Al-Dulaijan, Alawiyyah Alsayed, Mashael T. Alhejji et al.· Biomaterial Investigations i...· 0 citations
We use cookies to run the site and, with your consent, for analytics and to show ads.
See our Cookie Policy.