Skip to content
Conference

Investigations on the nano-imprint process for large-area pulse compression gratings

Oct 2026 · European Mask and Lithography Conference · Vol 14508, pp. 145080F - 145080F-12 · 0 citations · 23 references
Engineering

Abstract

Nano-imprint lithography (NIL) has emerged as a low-cost method to fabricate nano-scale structures in high quality and quantity. Given the widespread use of optical gratings in applications such as pulse compression in high-power laser systems or spectrometer systems, NIL offers a great potential for the mass production of respective gratings. Both applications demand a large area without defects, and notably, the replication process must maintain wavefront accuracy. Besides replication on an extremely even substrate and resin layer homogeneity, strict preservation of the grating period is also needed, as deviations from period create wavefront errors. Nowadays, most replication techniques apply flexible mold substrates, such as PET foils. However, non-uniform imprint forces may lead to shearing, deformation, and inhomogeneous residual layer thickness and distort the periodicity. While common metrology methods such as scanning electron microscopy (SEM) and atomic force microscopy (AFM) are typically limited to local measurements, optical characterization methods like interferometric wavefront analysis are sensitive to large-distant fabrication errors. For this study a 90mmx 90mm pulse compression grating was fabricated by electron-beam lithography and replicated by nano-imprinting utilizing a soft mold. Large-scale AFM and interferometry were performed and correlated to retrieve especially longdistance non-uniformity. To focus on the nano-imprint process, the samples are plain fused silica without a high reflective coating. The diffraction efficiency as a result of a proper grating depth and duty cycle has not been investigated.

View source

We use cookies to run the site and, with your consent, for analytics and to show ads. See our Cookie Policy.