2027· Journal of materials in civil engineering· Vol 39· 0 citations· 21 references
Abstract
Moisture content critically affects the physical and mechanical performance of bamboo. To enable rapid prediction of the moisture content of Moso bamboo (
Phyllostachys edulis
), this study investigated the isothermal sorption behavior of three types of bamboo: untreated (UT), chemically modified (CT), and thermally modified (HT). Isothermal sorption tests were conducted at different relative humidity (RH) levels, and the effects of modification processes on hygroscopic behavior were analyzed. Five commonly used isothermal sorption models were evaluated for their applicability, among which the Hailwood–Horrobin (HH) model was identified as the most suitable for both untreated and modified bamboo. The model was further validated using recorded environmental conditions and measured moisture contents of bamboo splits. To account for oven-drying effects prior to sorption testing, correction coefficients of 1.24, 1.19, and 1.00 were introduced for UT, CT, and HT, respectively. Based on the corrected HH model, practical isothermal sorption curves were established for rapid prediction of the moisture content of untreated and modified Moso bamboo, providing a practical basis for engineering applications.
Biomass is a promising renewable energy source; however, its direct use is limited by high hygroscopicity, low energy density, and challenging storage conditions. This study investigated the effect of thermal pretreatment temperature on the moisture sorption behavior and thermal stability of waste hops. Waste hops were...
Andreja Škorjanc, D. Goričanec, Klemen Rola et al.· Sustainability· 0 citations
Inorganic-bonded bamboo composite (InorgBam) has potential advantages in improving the fire performance of bamboo-based materials owing to its organic–inorganic composite structure. In this study, cone calorimeter tests were conducted to investigate the combustion behavior of InorgBam, spruce wood, laminated bamboo l...
Run-Dong Zhao, Zhuo-Hong Qiu, Zheng Su et al.· Journal of composite materia...· 0 citations
This study investigates the drying behavior of graphene oxide (GO)-modified concretes prepared with OPC, PPC, and LC3 cements. Concrete specimens containing 0 %, 0.03 %, 0.05 %, and 0.08 % GO were exposed to uncontrolled sheltered environmental conditions, and the normalized degree of saturation was monitored over time...
Bal Krishan, M. Kamran, S. K. M. Rao· The Indian Concrete Journal· 0 citations
Water retention and deformation evolve simultaneously during drying, making their interaction an essential aspect of the hydro-mechanical behaviour of compacted unsaturated soils, particularly when deformation is not mechanically constrained. This study investigates the drying soil-water characteristic curve (SWCC) of...
Cuong Manh Le, T. N. Nguyen· IOP Conference Series: Earth...· 0 citations
This paper investigates the isothermal drying kinetics and effective moisture diffusivity of cylindrical Shorea robusta (Sal) wood particles dried in a hot air oven at 75 °C, 90 °C, and 105 °C. Sal wood, one of the most ecologically and commercially significant hardwood species of the Indian subcontinent, holds conside...
Munna Verma, Ravi Kant Ranjan· Journal of Mechanical Engine...· 0 citations
Sorption drying removes water from seeds at ambient temperature by contact with a granular hygroscopic solid, thereby avoiding thermal stress. We studied the drying kinetics of barley (Hordeum vulgare L.) using granulated kieserite MgSO4·H2O and characterised the desiccant by SEM, XRD, and DSC–TG. Barley wetted to 19–2...
T. Ivanenko, E. Fomenko, E. Morozov et al.· AgriEngineering· 0 citations
We use cookies to run the site and, with your consent, for analytics and to show ads.
See our Cookie Policy.