Experimental investigation and modelling of drying curves in graphene oxide-modified concretes with OPC, PPC, and LC3
Abstract
This study investigates the drying behavior of graphene oxide (GO)-modified concretes prepared with OPC, PPC, and LC3 cements. Concrete specimens containing 0 %, 0.03 %, 0.05 %, and 0.08 % GO were exposed to uncontrolled sheltered environmental conditions, and the normalized degree of saturation was monitored over time. The experimental drying curves were analyzed using the linear, exponential, anomalous diffusion, and Henderson and Pabis models. The results showed that the influence of GO on drying behavior was binderdependent. In OPC concrete, 0.03 % GO provided the highest moisture retention, whereas PPC exhibited only marginal variations among GO dosages. LC3 composites demonstrated the greatest moisture retention, with 0.05 % GO exhibiting the highest degree of saturation, indicating a synergistic interaction between GO nanosheets and the limestone–calcined clay binder system. In contrast, excessive GO addition (0.08 %) offered limited benefit and adversely affected the drying performance of LC3. Among the evaluated models, the exponential model provided the best fit to the experimental data and offers a practical tool for estimating moisture evolution and supporting future hygrothermal modelling of cementitious composites.