Sep 2026· Small· pp.
e75952
· 0 citations· 28 references
Medicine
Abstract
With the rapid development of distributed sensor systems, direct-current triboelectric nanogenerators (DC-TENGs) based on tribovoltaic effects have attracted wide attention. However, the development of efficient semiconductor materials for enhanced output remains challenging. Herein, air-stable Sb3+ doped CsBi3I10 films were synthesized, and DC-TENG devices based on Al/CsBi2.7Sb0.3I10 dynamic Schottky junction were then developed for harvesting mechanical and solar energy. Among a series of Sb3+ doping concentrations, the CsBi2.7Sb0.3I10 film exhibits the narrowest FWHM (Full Width at Half Maximum) value and the best crystallinity. Being ascribed to more suitable energy-level alignment, reduced trap states, and especially increased dielectric constant, the optimized Al/CsBi2.7Sb0.3I10 DC-TENG delivers a short-circuit current density of 31.4 A m-2 and an open-circuit voltage of 4.3 V under dark conditions, with respective increase of approximately 29.8% and 26.5% compared with the Al/CsBi3I10 DC-TENG. Under simulated sunlight illumination, the output further increases to 44.1 A m-2 and 7.5 V, which is attributed to the contribution of photogenerated carriers during the dynamic contact process. Moreover, the device maintains stable output performance after being placed in ambient air for 49 days. This work provides a feasible strategy for developing lead-free perovskite semiconductor-based DC-TENGs with enhanced electrical output and multi-energy harvesting capability.
Dielectric capacitors are essential components in modern electronic devices, but their limited energy storage performance has become one of the core obstacles to their cutting-edge applications. Herein, by constructing nanodomains and improving electric field endurance, Bi0.5Na0.5TiO3–SrTiO3–Sr(Sc0.5Ta0.5)O3 relaxor fe...
Ze-Xing Deng, Shi-Jie Yin, Zhi-Qing Li et al.· Applied Physics Letters· 0 citations
Photo-assisted supercapacitors (PASCs) integrate solar-energy harvesting and electrochemical energy storage, but their performance is limited by inefficient photocarrier separation and sluggish charge-transfer kinetics. Herein, a CdS/Ni-MOF heterostructure photoelectrode is constructed via an in situ growth strategy. V...
Direct-current tribovoltaic nanogenerators (DC-TVNGs) based on dynamic semiconductor junctions can generate electrical output without external rectification. However, their scalable application is constrained by the substantial decrease in current output with increasing device dimensions. Here, we introduce single-wall...
Ru-Xuan Zhang, Kun Li, Tian Tian et al.· ACS Applied Materials and In...· 0 citations
Reversible solid oxide fuel cells (RSOCs) require air electrodes that are active for both oxygen reduction and oxygen evolution reactions while resisting degradation under operating conditions. YbFeO3 (YbFO) offers a robust orthorhombic perovskite framework with moderate thermal expansion, but its intrinsic electrode a...
Sodium-ion batteries are very promising for sustainable large-scale energy storage. Among various cathode materials, Mn-based P2-type layered oxides emerged for their high theoretical capacity and fast sodium-ion diffusion pathways, but the detrimental P2-O2 phase transition at high voltage limits their cycle life an...
Andrea Grillo, A. Massaro, A. Muñoz-García et al.· ACS Electrochemistry· 0 citations
The development of high-performance, self-powered, and lead-free photodetectors has attracted significant attention for next-generation optoelectronic applications. In this work, a novel Mo2TiC2/CsSnI3 staggered (type-II) heterojunction photodetector (MPH-PD) is designed, optimized, and simulated using COMSOL Multiphys...
Amal M. Al-Amri· Micromachines· 0 citations
We use cookies to run the site and, with your consent, for analytics and to show ads.
See our Cookie Policy.