Skip to content
Open access

Antisite-Driven Self-Pillaring as a Design Strategy for High-Voltage P2-Type Na-Ion Cathodes: Zr-Doped P2-Na0.84Zr x Ni0.37– x Mn0.63O2

Oct 2026 · ACS Electrochemistry · 0 citations · 78 references

Abstract

Sodium-ion batteries are very promising for sustainable large-scale energy storage. Among various cathode materials, Mn-based P2-type layered oxides emerged for their high theoretical capacity and fast sodium-ion diffusion pathways, but the detrimental P2-O2 phase transition at high voltage limits their cycle life and energy density. Here, we address this challenge with a design strategy based on Zr substitution in P2-Na0.84Ni0.37Mn0.63O2. To this end, we exploit an integrated experimental and theoretical approach with electrochemical measurements, ex situ X-ray diffraction, and first-principles DFT+U calculations. Zr substitution delays the experimentally observed onset of the P2-O2 transition from approximately 3.7 V in the undoped material to 4.0 and 4.1 V for the 3 and 6% Zr compositions, respectively. At deep desodiation, calculations identify a strong thermodynamic preference for Zr/Na-vacancy antisite formation relative to Ni and Mn antisites. In the resulting tetrahedral coordination, Zr bridges adjacent transition-metal slabs, providing an atomic-scale self-pillaring motif that can hinder layer gliding. Overall, the 3% Zr cathode exhibits the best capacity retention among the investigated compositions during cycling between 2.0 and 4.1 V. These findings connect dopant-dependent defect energetics with electrochemical and structural signatures and provide a mechanistic framework for controlling high-voltage phase transformations in layered sodium-ion cathodes.

Read PDF

Similar papers

Oct 2026

Fe-Doped Non-stoichiometric Na3.4Co2.4(PO4)1.4P2O7 Cathode for High-Energy-Density Sodium-Ion Batteries.

Na4Co3(PO4)2P2O7 is a representative mixed polyanionic cathode with a high operating voltage and high energy density. However, insufficient cycling stability is the core bottleneck constraining the widespread application of sodium-ion batteries (SIBs). Herein, we propose a synergistic strategy that combines non-stoichi...

Can-Fu Zhang, Yu-Qi Chen, Jin-Bo Ye et al. · 0 citations
Oct 2026

p-n Heterojunction engineering in Na3V2(PO4)2F3-based cathode: space-charge boosted carrier kinetics for high-rate and wide-temperature sodium-ion batteries.

Sodium-ion batteries (SIBs) stand as promising candidates for grid-scale energy storage, with Na3V2(PO4)2F3 (NVPF) emerging as a competitive cathode material owing to its robust Na superionic conductor (NASICON)-type structure and high operating voltage. However, its practical application is severely hindered by intrin...

Han-Wei Huang, Zhen-Yi Gu, Hao-Ran Chen et al. · 0 citations
Oct 2026

Tunnel/P2 Interlocking Structure Coupled with TiO2 Interface Modification for Synergistically Enhanced Structural Stability of Sodium-Ion Battery Cathodes

Layered Mn-based oxides are promising cathode materials for sodium-ion batteries, which are prone to an irreversible P2-O2 phase transition during cycling and thus exhibit poor cyclic stability. Although tunnel-type Mn-based oxides feature a stable structure, they deliver a low sodium storage capacity. In this work,...

Yu Duan, Jia-Xuan He, Shuo Bao et al. · 0 citations
Sep 2026

Synergistic Al/Ti Co-doping and MgO Surface Engineering of O3-Type NaNi0.5Mn0.5O2 Cathodes for High-Performance Sodium-Ion Batteries

O3-type NaNi0.5Mn0.5O2 is considered a promising cathode material for sodium-ion batteries, but its electrochemical performance is limited by rapid capacity fading associated with Jahn–Teller distortion of Mn3+ and irreversible O3–P3 phase transitions at high voltages. To address these issues, a combined strategy inv...

Jia-Xuan He, Zi-Han Ma, Yu Duan et al. · 0 citations
Preprint Sep 2026

Functionalization-Driven Charge Redistribution Enabling Ultra-High-Capacity V2B MBene Anode for Li/Na ion batteries: A First-Principles study

Amid increasing global demand for clean, sustainable energy, the search for novel electrode materials has emerged as a crucial link to advancing future energy storage technologies. Here, we explored the potential of N-functionalized 2D MBene V2BN2 as anode materials for Li- and Na-ion batteries using first-principles c...

Shaiokh Bin Abi, Ahmed Zubair · 0 citations
Oct 2026

Quasi-Zero-Strain High-Voltage P2-Type Na2/3Li1/6Ni1/3Mn1/2O2 Cathodes Enabled by Capacity-Strain Balance

Deep sodium extraction/insertion in Mn-based P2-type layered cathodes usually induces undesired lattice strain, transition-metal layer gliding, and irreversible phase transitions, which limit their high-voltage cycling stability. Here, Li incorporation is employed to construct P2–Na2/3Li1/6Ni1/3Mn1/2O2 and regulate t...

Di Miao, Jia-Min Fei, Nan Zhang et al. · 0 citations

We use cookies to run the site and, with your consent, for analytics and to show ads. See our Cookie Policy.