Oct 2026· Optical Engineering: The Journal of SPIE· 0 citations
Abstract
Two-photon lithography (TPL) enables three-dimensional micro/nano-fabrication for diffractive optical neural networks (D2NNs), but its commonly used polymeric materials exhibit low refractive indices, limiting phase modulation and diffraction efficiency in compact optical processors. Here, we introduce an ultrathin high-refractive-index ZnO coating (44.5 nm, λ/10 at 532 nm) on TPL-fabricated blazed gratings and Fresnel microlenses to overcome this intrinsic material limitation. The conformal ZnO layer preserves the original polymer microstructure geometry while significantly increasing the local optical path difference, thereby enhancing phase accumulation for high-fidelity diffraction. Experimental measurements show that diffraction efficiency is improved by 20% for blazed gratings and >50% for microlenses, accompanied by stronger focal confinement and reduced FWHM, consistent with enhanced wavefront control. Material characterization via XPS, XRD, SEM, and EDS confirms uniformity, crystallinity, and chemical stability of the ZnO coating. This hybrid polymer–ZnO strategy addresses the low-index limitation of TPL materials and demonstrates a feasible route toward compact, high-performance D2NN components with precise phase modulation and energy-efficient optical processing.
The rapid development of nanoscale integrated photonics demands core materials combining high transparency, high refractive index, and low optical loss. In this work, semi-transparent polycrystalline copper iodide (CuI) bulks were fabricated via the vertical Bridgman technique. Structural characterization reveals den...
Zhuo-Ran Ji, Yu-Zhao Ouyang, Ke-Qi Xia et al.· ACS Applied Nano Materials· 0 citations
To simultaneously achieve high spectral resolution and efficient fixed-wavelength intensity interrogation in D-shaped fiber refractive-index sensing, a waveguide-coupled D-shaped optical fiber sensor integrating an indium tin oxide (ITO) film, a Cytop coupling layer, and a silicon subwavelength grating (Si-SWG) is prop...
Compact optical systems with continuously tunable focal lengths are highly desirable for machine vision, biomedical imaging, and miniaturized cameras. Rotational Moir\'e lenses offer a planar approach to focal-length tuning, but metasurface-based implementations typically require complex nanofabrication processes that...
Gui-Yuan Cao, Xin-Yuan Du, Han Lin et al.· 0 citations
Perovskites have emerged as promising materials for high‐performance photodetectors owing to their strong optical absorption, high carrier mobility, and long carrier diffusion lengths. However, their intrinsic instability remains a major obstacle to practical applications. Here, MAPbI3 microwires are encapsulated with...
Zong-Xuan Liu, Jin-Cheng Lei, Ying-Li Ma et al.· Advanced Functional Material...· 0 citations
Adoption of high–refractive-index (high‑RI) materials is essential for improving the optical performance of surface-relief-grating waveguide combiners used in augmented-reality (AR) glasses. Their operation relies on total internal reflection at the interface between a high-index waveguide and a low-index environment;...
Takuya Higuchi, Shunichi Kawasaki, S. Uno et al.· Photomask Technology 2026· 0 citations
Phase-change materials (PCMs) are widely utilized for non-volatile optical field manipulation due to their significant optical contrast between amorphous and crystalline states. Direct laser writing (DWL) enables mask-free patterning of phase-change structures on low-loss Sb₂Se₃ films, creating high-refractive-index cr...
Jia-Xin Zhang, Zhen-Yang Li, Hao Sun et al.· Global Intelligent Industry...· 0 citations
We use cookies to run the site and, with your consent, for analytics and to show ads.
See our Cookie Policy.