Scalable manufacturing of high‑index surface‑relief gratings in SiC for augmented‑reality waveguide
Abstract
Adoption of high–refractive-index (high‑RI) materials is essential for improving the optical performance of surface-relief-grating waveguide combiners used in augmented-reality (AR) glasses. Their operation relies on total internal reflection at the interface between a high-index waveguide and a low-index environment; therefore, the substrate refractive index is a key factor governing the achievable field of view (FoV). In addition, increasing the refractive-index contrast between the grating material and its surroundings enlarges the usable diffraction-efficiency bandwidth, thereby expanding the design space for performance optimization. This presentation reports progress in fabricating high-fidelity grating structures by combining Displacement Talbot Lithography (DTL) with advanced dry-etching processes. We focus on a promising high‑RI material: silicon carbide (SiC). With a refractive index greater than 2.6 across the visible wavelength range, SiC provides an intrinsically high-index waveguide platform. We demonstrate pattern transfer from DTL-defined resist into SiC, forming periodic rectangular trenches with negligible depth variation across a wide range of mask duty cycles. The resulting process stability and repeatability enable manufacturing-aware optical design by directly linking optical targets to achievable grating geometries and tolerances. Overall, the proposed DTL and dry-etch approach offers a scalable route for manufacturing waveguide combiners that are both optically efficient and economically viable.