2026· Global Journal of Pure and Applied Sciences· 0 citations
Abstract
Traditional energy management at universities is characterised by manual monitoring, static control systems, and lack of real-time data, resulting in excessive energy consumption and high operational costs. This study presents the design, implementation, and evaluation of a Smart Energy Management System (SEMS) at the University of Calabar, Cross River State, Nigeria, with the objective of reducing energy consumption and operational costs. The SEMS integrates Internet of Things (IoT) sensors, real-time data analytics, and automated control mechanisms to monitor and manage energy consumption dynamically. Key hardware components include motion sensors, smart meters, and environmental monitors, all connected to a centralised dashboard that provides actionable insights for energy optimisation. A six-month pilot deployment using a three-tier IoT architecture demonstrated energy savings of 30–40%, improved operational efficiency, with automated response times of 2–4 seconds and system uptime exceeding 95%. Comparative analysis confirmed that the SEMS outperforms traditional energy management in responsiveness (automated response time of 2.5–3.5 seconds versus delayed manual response), cost-effectiveness (30–40% reduction in energy expenditure with low long-term operational costs), and data visibility (real-time, room-level consumption data versus monthly, incomplete utility bills). The study provides a scalable framework for implementing smart energy solutions in university settings.
The increasing complexity of residential energy systems and the growing penetration of distributed resources require practical energy-management solutions that extend beyond conventional metering. This paper presents the design and implementation of a real-time Internet of Things (IoT)-based energy-management system for monitoring and controlling household energy consumption under different operating conditions. The proposed system adopts a dual-processor architecture, in which a primary microcontroller performs time-critical electrical measurements and low-level load switching, while a secondary processor operates as a local IoT gateway for data handling, rule-based control decisions, local visualization, and message queuing telemetry transport (MQTT)-based cloud communication through a 4G link. The contribution of this work is not associated with the individual use of dual processing, cellular communication, cloud monitoring, load shedding, or backup power, as these technologies have been previously reported in smart-metering and home energy-management systems. Instead, the study focuses on their coordinated integration within a residential-scale prototype that combines calibrated per-load monitoring, priority-based load control, outage-resilient reporting, and credit-aware load restriction. The system measures voltage, current, active and apparent power, power factor, and energy consumption for individual loads and supports centralized visualization through a cloud-based dashboard. The prototype was experimentally evaluated under three representative scenarios: overload, main power outage, and low-credit operation. In the overload scenario, automatic priority-based load shedding reduced the total load by up to 75%. During power outages, a battery-supported subsystem maintained monitoring and communication for real-time outage reporting. In the low-credit scenario, non-essential loads were disconnected when the user balance fell below a predefined threshold, while essential loads remained energized. The results demonstrate that the implemented prototype can provide integrated monitoring, local rule-based control, cloud reporting, and backup-supported operation within a unified residential energy-management platform.
Mohammed Sabah, Akram Elmitwally, A. Eladl· Engineer· 0 citations
The findings indicate that integrating IoT technology with cloud communication and MATLAB analytics provides a practical, low-cost, and scalable solution for intelligent energy monitoring.
I. M. Danjuma, M. Asih, S. S. Garba et al.· International Journal of App...· 0 citations
Managing energy consumption in critical government infrastructure, such as meteorological stations, requires a balance between operational reliability and efficiency. This paper presents the development of an integrated IoT system designed to support an adaptive energy management framework at the Hang Nadim Meteorological Station. The proposed system utilizes a robust wired RS-485 network to ensure stable data transmission in high-interference environments. The architecture integrates distributed client nodes for real-time power analytics and internal climate monitoring. A core feature of this development is the synchronization of internal metrics with outdoor temperature data acquired from a local Automatic Weather Station (AWS). This integration drives an adaptive control logic via IR Blasters, which dynamically adjusts AC set-points based on real-time atmospheric conditions and occupancy schedules. Experimental results demonstrate a significant reduction in energy waste: the system achieved a maximum efficiency of 38.27% in the Observation Room (ROBS) during weekdays and a consistent 23.31% saving in the Data Room (RDATA). The implementation shows that the system effectively stabilizes energy profiles and eliminates unnecessary power spikes during non-operational periods, providing a resilient and industrial-grade solution for sustainable office energy management.
Dedi Harianto Panjaitan, Eko Setijadi, P. H. Mukti· International Seminar on Int...· 0 citations
The existing energy metering systems lack real-time monitoring capabilities as well as cloud-based access. Smart grid technology helps in increasing energy efficiency and reliability of electrical power systems. This research work intends to design and develop an IoT-based smart energy metering system for real-time monitoring and visualization. The proposed system encompasses ESP32 microcontroller integrated with ZMPT101B voltage sensor and SCT-013 current sensors. However, the collected data is then processed using the EmonLib library in order to evaluate voltage, current, power, power factor, and energy consumption. The processed information is later sent to the Blynk cloud using Wi-Fi technology. As a result of the performed experimental tests, voltage, current, power, and energy consumption measurement errors has not exceeded 0.80%, 4.55%, 4.00%, and 2.06%, respectively.
R. G, Pavalam J., R. S et al.· Journal of Electrical Engine...· 0 citations
IoT is one of the significant enabling technologies in the contemporary energy landscape. This work addresses intelligent load management under fault, under-load, and overload conditions. Electrical equipment requires automatic and rapid response to avoid damage and prevent service interruption. In contrast to traditional circuit breakers that disconnect the entire system, the proposed architecture employs ESP32-based intelligent control, together with ACS712 current sensors, to provide accurate per-load current measurements and load-specific overcurrent protection. The system is also capable of selective load isolation, meaning that it maintains the operation of healthy circuits and automatically disconnects only the faulty load without affecting other loads. Cloud-based monitoring is implemented via the ThingSpeak platform, enabling real-time remote system surveillance through any internet-connected device. The faulty section of the system is readily identified from the current readings visualised on the cloud dashboard and mobile interface. The proposed system is powered primarily by solar photovoltaic sources and can also operate from the utility grid, providing flexibility across renewable and conventional supply scenarios. Experimental testing demonstrates protection response times in the sub-200 ms range and high-accuracy current monitoring with a mean absolute error below 0.05 A. The key contributions include: selective load protection, real-time IoT-based energy analysis, and a cost-effective open-hardware architecture. The work advances the safety and efficiency of smart energy control systems in distributed renewable energy environments.
Jeevitha Kandasamy, Kalaivani C, Shashank S Bhagwat et al.· 2026 4th International Confe...· 0 citations
This paper presents the design, development and evaluation of an Internet of Things (IoT)-based smart waste management system aimed at addressing the inefficiencies and public health concerns associated with traditional waste collection methods. The proposed system integrates ultrasonic sensors for real-time bin fill-level detection, a rain sensor for environmental compensation, an ESP32 microcontroller for data processing and transmission, and a dual-mode feedback mechanism via a local LCD display and a remote web dashboard. Experimental results demonstrate a 99% accuracy in fill-level and rain detection, with data updates to the cloud platform (ThingSpeak) occurring within 2 seconds of a 15-second reporting interval. The system's robustness, low cost, and energy efficiency highlight its potential for scalable deployment in urban environments, contributing to cleaner, smarter communities.
O. Saeed, Ayesha Noroz, Maimoona Waqar et al.· Natural and Applied Sciences...· 0 citations
We use cookies to run the site and, with your consent, for analytics and to show ads.
See our Cookie Policy.
