Oct 2026· SAE International Journal of Fuels and Lubricants· Vol 19· 0 citations· 42 references
Abstract
With the rising pressure of a global energy transition to cleaner energy systems,
the transportation sector faces a challenge in maintaining its current structure
and adapting to all the required changes. Dual-fuel technology emerges as a
promising alternative to keep the viability of the sector while utilizing
environmentally friendly fuels alongside traditional hydrocarbons, without deep
structural changes in the current framework. This work investigates the impact
of the use of methane gas coupled with diesel fuel, specifically focusing on its
influence on the ignition delay time (IDT) in a dual-fuel combustion setting.
The investigation employed the Advanced Fuel Ignition Delay Analyzer (AFIDA), a
constant-volume combustion chamber capable of automatically measuring multiple
samples in a single run. Methane gas was introduced into the chamber at molar
concentrations of 1%, 2%, and 3% and at initial pressures of 5 and 10 bar, with
temperature values ranging from 653 to 723 K. With the same amount of diesel
being injected for all experiments, it was possible to replace up to 40% of the
total energy release with methane during the combustion process. Compared to
pure diesel, the IDT values of the methane–diesel mixtures were only affected in
low-temperature settings. At higher temperatures, the IDT values remained
largely consistent with those of pure diesel, suggesting that higher
substitution ratios of methane are feasible without compromising the ignition
delay. This work also uncovered that the percentage of energy replaced by
methane does not have a direct correlation with IDT or peak pressure values.
To accelerate the adoption of renewable fuels in heavy-duty transportation, a conventional diesel engine was retrofitted to operate on gaseous fuels. This approach supports the transition from diesel to renewable energy carriers while maximizing the reuse of existing engine platforms. However, converting a liquid-fuel...
Raphael Rößlhuemer, Patrick Fitz, Felix Fellner et al.· SAE technical paper series· 0 citations
Ammonia is a promising carbon-free hydrogen carrier with wide industrial availability; however, its low flame speed, high latent heat, and narrow flammability characteristics create significant challenges for compression ignition engines. This study investigates ammonia/diesel dual-fuel operation at 50% and 80% loa...
Anadi Kapoor, J. K. Pandey, George Varghese et al.· Discover Applied Sciences· 0 citations
Global warming caused by greenhouse gas emissions requires major changes in the energy sector to mitigate the rise in atmospheric temperature. One of the most important strategies to address this challenge is the replacement of fossil fuels with cleaner sources, and hydrogen is widely recognised as a promising alternat...
Marcos A. M. Silva, Gonçalo P. Pacheco, Miguel A. A. Mendes et al.· Journal of the Brazilian Soc...· 0 citations
Hydrogen is widely recognized as a promising zero-carbon fuel for internal combustion engines due to its zero carbon emissions, high laminar flame speed, and wide flammability limits. In dual-fuel compression ignition engines, substituting part of the diesel fuel with hydrogen can significantly reduce carbon-based emis...
Takwa Hamdi, Samuel Molima, Juan José Hernández et al.· Engineering Perspective· 0 citations
Ammonia is regarded as a promising carbon-free fuel for the green and low-carbon transition of the shipping industry, yet its high ignition energy requirement and slow flame propagation make high ammonia substitution ratios (AER) challenging for ammonia/diesel dual-fuel marine engines. This study numerically investigat...
Zhong-Cheng Wang, Jie Zhu, Xiao-Yu Liu et al.· Journal of Marine Science an...· 0 citations