Aug 2026· Advances in Materials· Vol 38, pp.
e74698
· 0 citations· 24 references
Medicine
Abstract
Particle packing in battery electrodes is pivotal to the fast-charging performance of lithium-ion batteries (LIBs). However, precise control of particle packing structure remains a major challenge in electrode fabrication, primarily owing to the absence of robust interfacial bonding between micron-scale particles. Herein, we propose a novel layer-by-layer single-layer particle assembly technique to fabricate electrodes with well-defined particle packing structures. Using this approach, we prepared a 12-meter-long graphite (Gr)/hard carbon (HC) hybrid anode featuring a body-centered cubic (BCC)-like structure, which maximizes intimate Gr/HC contact interfaces and facilitates solid-state Li+ transport. Coupled with LiFePO4 (LFP) cathodes, the as-fabricated anode exhibits a high-capacity retention of 80.7% after 1650 cycles at 4C. From an electrode design standpoint, this controllable particle-packing strategy paves the way for a universal framework for developing sustainable, long-cycling, and fast-charging electrodes, potentially applicable to many types of battery anodes and cathodes.
LiFePO4 cathodes have gained much attention for Li-ion batteries due to their superior electrochemical and economic features. However, their practical applications are limited by poor electronic conductivity, sluggish lithium-ion diffusion, and unstable cathode/electrolyte interfaces. Conventional approaches require se...
Mohammed A. M. M. al-Samet, Engin Burgaz· ACS Applied Materials and In...· 0 citations
High-capacity Li-rich Mn-based oxide cathodes exhibit exceptional specific capacity density; however, their utilization encounters challenges pertaining to sluggish Li+ ion transport kinetics and severe interfacial issues in high-voltage lithium-ion batteries, especially under the working condition of fast charging. He...
Lithium-rich layered oxides (LROs) are promising cathode materials for high-energy lithium-ion batteries because of their high specific capacity and energy density. However, oxygen release, stress accumulation, and interfacial degradation during high-voltage cycling still hinder their practical application. Here, a...
Yuxin Zheng, Ao Li, Jing-Ling Yan et al.· Nano Reseach· 0 citations
The structural design of self-standing electrodes without binders and current collectors is critical for maximizing the energy density of lithium-ion batteries, yet achieving electrical conductivity, ion accessibility, and mechanical integrity in a single architecture remains challenging. Although Ti3C2Tx MXene is a pr...
Tae Hyeon Park, Ki Yun Kim, Jea Uk Lee· Batteries· 0 citations
As the global energy transition creates an increasingly pressing need for lithium-ion batteries, silicon/carbon composite anodes have garnered substantial attention owing to their ultrahigh specific capacity. However, their commercial application is severely hindered by critical issues, including particle pulverization...
Yong-Kang Li, Ya-Song Han, Li-Hua Fan et al.· ChemSusChem· 0 citations
Silicon (Si) has a high theoretical capacity of 4200 mAh/g in lithium-ion batteries anode; however, it faces three main difficulties: an unstable Solid Electrolyte Interface (SEI), particle pulverization, and volume expansion. In this work, we present a highly efficient anode material for Lithium-Ion CR2032 3V half-cel...
S. Thombare, Ranjit Humane, R. Kalubarme et al.· Frontiers in Batteries and E...· 0 citations
We use cookies to run the site and, with your consent, for analytics and to show ads.
See our Cookie Policy.