Skip to content
Open access

Reproducible AES-128 Benchmarking and Security-Assessment Boundary for Resource-Constrained IoT Environments

Oct 2026 · International Journal of Electrical and Electronics Engineering · 0 citations · 18 references

TL;DR

The study provides an AES-128 benchmarking methodology for IoT security evaluation that is statistically founded and fully reproducible and points out that process-level memory profiling is limited for small workloads since they are impacted by noise and variability in the measurement.

Abstract

To meet the constraints of resource-constrained Internet of Things (IoT) devices, the encryption mechanism must provide confidentiality while adding little complexity and memory usage. This work presents a reproducible Advanced Encryption Standard (AES) -128 performance benchmarking and security boundary analysis for constrained IoT applications. Before any benchmarking, the AES-128 implementation was tested against a standard cryptographic test vector. Encryption and decryption were verified based on the successful plaintext recovery. To enhance methodological rigour and reproducibility, the experimental design used 250 runs over four IoT-relevant payload sizes (16 bytes, 1 KB, 10 KB, and 1 MB) executed in a controlled execution environment. The evaluation consisted of performance metrics that include encryption time, decryption time, execution stability, standard deviation and memory variation, analysed in a controlled execution environment. Results show that while AES-128 exhibits stable run-to-run timing for small and medium payloads, execution overhead and timing variance increased for 1 MB workloads in the implementation presented using Python. It also points out that process-level memory profiling is limited for small workloads since they are impacted by noise and variability in the measurement. Reduced-key brute-force attack analysis is shown only as a pedagogical example of key-space growth and makes no claim about the security of full AES configurations. Likewise, side-channel attack concerns are qualitatively addressed because attack analysis was performed. The study provides an AES-128 benchmarking methodology for IoT security evaluation that is statistically founded and fully reproducible.

Read PDF

Similar papers

Open access Oct 2026

A Descriptive Pilot Study of Performance and Resource Utilization of Lightweight Cryptography Implementations

The rapid proliferation of the Internet of Things (IoT), accompanied by the widespread deployment of embedded systems, has significantly increased the demand for cryptographic mechanisms specifically tailored to resource-constrained environments. In response to these challenges, lightweight cryptographic algorithms hav...

R. Kozicki, Andrzej Mycek, Daniel Grzonka · 0 citations
Conference Open access Sep 2026

Layer-Wise Analysis of Lightweight Cryptographic Protocols for IoT Security: A Threat-Driven Survey and LACSS-Based Evaluation Framework

The rapid growth of Internet of Things (IoT) devices has created major security challenges across different application environments, particularly because many IoT devices operate with limited computing power, memory, and energy resources. Lightweight Cryptography (LWC) has emerged as an effective approach for securing...

Charanraj B. R., Prasad B. Honnavalli, Y. R. · 0 citations
Open access Oct 2026

Control optimized AES-128 cryptographic architectures achieving 94.2% logic reduction and 50% power savings

The growing deployment of Internet of Things (IoT) devices, embedded systems, and hardware security platforms has increased the demand for lightweight cryptographic architectures capable of delivering strong security under stringent area and power constraints. Although the Advanced Encryption Standard (AES) is widely a...

M. M. Hasan, Raisa Ahmed, Md. Tawfiq Amin et al. · 0 citations
#artificial intelligence Preprint Sep 2026

CESBench: Benchmarking Large Language Models on Cryptographic Engineering Security for IoT Devices

This paper presents CESBench, 380 expert-written items across six sub-domains of cryptographic engineering security for IoT devices: side-channel, fault injection, implementation, countermeasures, evaluation, and integration, and presents the benchmark, prompts, and per-item results.

Wen-Quan Zhou, An Wang, Jing-Ping Liang et al. · 0 citations
Conference Open access Sep 2026

Performance Evaluation of Lightweight Cryptographic Algorithms for IoT Devices

An adaptive selection framework utilizing various performance measures, including energy consumption estimation, is proposed for IoT cryptography and demonstrates considerable gaps between lightweight and classic algorithms in computational efficiency.

V. Naveen, A. Vani · 0 citations
Open access Oct 2026

Hardware Evaluation of a Lightweight Secure Communication Protocol for Constrained IoT Devices

This paper details the design and hardware evaluation of a lightweight communication protocol for constrained Internet of Things (IoT) devices. The design was implemented on one single Nordic nRF52840 Development Kit (ARM Cortex-M4F, 64 MHz) with the help of Zephyr OS, using the micro-ECC library for ECDH key exchange...

Turelle Ange Leslie Aroun Faimindi Beregnon, Lawrence Ngugi, I. Muisyo · 0 citations

We use cookies to run the site and, with your consent, for analytics and to show ads. See our Cookie Policy.