Aug 2026· International journal of computer information systems and industrial management applications· Vol 18, pp. 589-612· 0 citations
Abstract
The following paper is a thorough simulation-driven research on inverted planar perovskite solar cells (PSCs) operating on the SCAPS-1D platform and aiming at improving the optimal performance in terms of material choice and optimization of device parameters. The device structure consists of an inorganic transport layer architecture with nickel oxide (NiOₓ) as hole transport layer (HTL), different electron transport layers (ETLs) such as titanium dioxide (TiO₂), zinc oxide (ZnO), and tin dioxide (SnO₂), and high-performance perovskite absorber layer. The effects of important parameters in the photovoltaic performance like the absorber thickness, temperature change, bulk defect density, interface recombination, and back contact materials are systematically examined. The findings prove that the ETL selection and physical parameters optimization strongly impact the device functioning. Devices based upon ZnO show higher short-circuit current density (Jsc) because of better electron mobility, and those based upon SnO₂ have better open-circuit voltage (Voc) and fill factor (FF) because of better band alignment with the absorber layer. An ideal absorber thickness is found in 600–700 nm where the highest power conversion efficiency (PCE) is ideal. More so the analysis also shows that the higher the defect density and temperature, the worse the performance of the device is because of the higher the recombination losses. The engineering of back contact is also a vital factor as the better the work function metals are the more the improved charge extraction and efficiency. The optimal device scheme is characterized by the highest efficiency of about 18–19 percent, which demonstrates the efficiency of inorganic transport layers and the use of multiple parameters. This work is also capable of offering essential understanding of how to design and optimize the high-efficiency inverted PSCs and can serve as a solid base of simulation to be used in the development of photovoltaic devices in the future.
In this study, InPbI3-based perovskite solar cells were numerically analyzed using the SCAPS-1D simulation tool. The device architecture, FTO/WS2/InPbI3/CuI, was modeled and systematically optimized. The investigation focused on the influence of parameters such as the thicknesses of the hole transport layer (HTL), elec...
P. O. Fasanmi, B. Kheswa, H. Al-Dmour· Discover Nano· 0 citations
Exceptional optoelectronic properties and rapidly improving efficiency of lead‐based perovskite solar cells (PSCs) make this renewable energy technology highly promising for commercialization. This study presents a comprehensive simulation‐based investigation of Sn
2+
‐doped CsPbBr
3
PSCs using numerical modeling...
Deenbandhu Sharma, S. K. Sharma· Physica Status Solidi (a)· 0 citations
Perovskite solar cells (PSCs) have recently gained attention due to their high -power conversion efficiency, low fabrication cost and the increasing global demand for sustainable energy sources. However, the long-term stability of PSCs remains a major challenge. In this context, two-dimensional(2D) perovskites can...
Utkarsh Tiwari, P. Chaudhary, R. Gautam et al.· Scientific Reports· 0 citations
This work presents a systematic SCAPS-1D investigation of the influence of five hole transport layers (HTLs), namely CuSCN, Cu2O, P3HT, PTAA, and PEDOT:PSS, on the interface energetics, charge transport, defect tolerance, and photovoltaic performance of lead-free RbSnBr₃ perovskite solar cells employing the FTO/SnS₂/ R...
Abdul Mateen Arshad, A. Ali, M. Tarar et al.· International Journal of Inn...· 0 citations