This research adopts molecular dynamics simulations to investigate the scratches on titanium alloys under varying laser intensities, focusing on microscopic characteristics such as tangential forces, material removal, subsurface deformation, and phase transition. The results indicate that the local energy input generated by laser irradiation leads to an increase in temperature in the irradiated area, and the increase in atomic thermal energy reduces the stability of interatomic interactions, resulting in a decrease in the stability of the local lattice structure. The thermal softening effect reduces material hardness, significantly enhancing the material removal rates and subsurface material integrity. If the laser intensities are set as the range from 5 × 108 W cm−2 to 7 × 108 W cm−2, both the phase transition and amorphous deformation are at a lower level. Under relatively high laser intensity conditions, the triangular amorphous rings disappear because stronger thermal softening promotes atomic rearrangement and inhibits the formation of the local amorphous structures. However, excessive laser thermal input may introduce additional subsurface damage. In contrast, when the laser intensity ranges between 5 × 108 and 7 × 108 W cm−2, a balance can be achieved between thermal softening and structural stability, thereby reducing the degree of phase transformation and amorphization, while also decreasing the size and number of triangular amorphous rings to some extent. These findings elucidate the material removal and subsurface damage mechanisms of titanium alloys under laser radiation at the nanoscale, providing theoretical basis and machining guidance for achieving ultra precision machining of titanium alloys.
Nickel (Ni)–Chromium (Cr)–Cobalt (Co) medium-entropy alloys are well known for their excellent mechanical strength, toughness, and thermal stability under extreme service conditions. Solid-state cold spray additive manufacturing (CSAM) has emerged as a promising route for manufacturing and repairing these alloys by e...
Ariful Islam, Md Tusher Ahmed, Jian-Zhi Li et al.· Progress in Additive Manufac...· 0 citations
Multi-laser powder bed fusion (PBF-ML) enables efficient fabrication of large components but introduces spatially heterogeneous thermal histories near inter-laser overlap zones. However, how global thermal-input variables and local thermal-path variations jointly affect defect evolution, microstructure, and mechanical...
This study systematically investigates the effects of different heat-source modes and process parameters on the microstructure of the
β
→
α
phase transformation in titanium alloys. By incorporating chemical free energy, interfacial energy, and elastic strain energy, the explicit nucleation and subsequent growth b...
Yu-Ting Liu, Ming-Wei Chen, Dong Ding et al.· 3D Printing and Additive Man...· 0 citations