GeoWeaver, a unified framework comprising a Geometric Prior Model (GPM) and Test-Time Adaptation (TTA) and a robust CDF-style objective jointly optimizes weighted 2D reprojection and 3D consistency residuals, is presented.
Abstract
Long-sequence 3D reconstruction from RGB videos requires both accurate local geometry and globally consistent camera motion. Feed-forward models provide strong depth and pose predictions, but their memory cost prevents joint inference over long sequences. Chunk-wise processing improves scalability, yet independently predicted chunks often exhibit scale drift, pose errors, and point-cloud misalignment. We present GeoWeaver, a unified framework comprising a Geometric Prior Model (GPM) and Test-Time Adaptation (TTA). The GPM predicts chunk-wise depth, confidence, and camera parameters as adjustable geometric priors. TTA then performs sequential initialization, global chunk-level Sim(3) alignment, and coarse-to-fine refinement of camera poses, affine depth corrections, and intrinsics. Dense correspondences provide adjacent, cross-chunk, and long-range constraints, while a robust CDF-style objective jointly optimizes weighted 2D reprojection and 3D consistency residuals. This design preserves local geometric accuracy while correcting accumulated pose, scale, depth, and calibration errors. Experiments across diverse long-sequence benchmarks demonstrate improved camera accuracy, global consistency, and point-cloud quality. Ablations verify the contribution of each adaptation stage, and applying the same TTA procedure to different geometric prior models consistently improves their trajectory estimates, demonstrating that GeoWeaver is not tied to a specific GPM.
Maintaining global geometric consistency is a central challenge in long-sequence 3D reconstruction, with scale drift being the most critical failure mode. In chunk-based inference pipelines, the scale degree of freedom in sequential Sim(3) alignment is left unconstrained, causing estimation errors to compound multiplicatively and distort global trajectories and point cloud geometry. We present a scale-consistency enhancement framework built on a key insight: in structured environments such as driving scenes, geometric quantities arising from environmental regularity remain inherently invariant across temporal segments, and discrepancies in their per-chunk measurements directly expose inter-chunk scale drift. We propose Scene Geometric Invariant Anchoring (SGIA), which extracts dominant geometric invariants from each chunk's predicted point cloud via coarse-to-fine robust estimation and exploits their cross-chunk consistency to establish scale constraints independent of point cloud registration, explicitly degenerating 7-DoF Sim(3) alignment into 6-DoF rigid-body transformation and severing chain-wise scale error propagation at its source. We further introduce a lightweight test-time adaptation strategy that fine-tunes only normalization-layer parameters via multi-objective self-supervision, progressively improving intra-chunk predictions along the sequence. Both modules are plug-and-play and require no offline retraining. Experiments on multiple long-sequence benchmarks demonstrate state-of-the-art performance, reducing absolute trajectory error by up to 32% with significant gains in trajectory stability and reconstruction quality. Code: https://github.com/WZ-CS/VGGT-Align
Render--match--PnP relocalization establishes correspondences between query image pixels and 3D map points for camera pose recovery, but their potential to support dense depth estimation is often overlooked. To exploit this geometric information, we present RIDE, which estimates dense metric depth from a robot's RGB stream. Given a metrically scaled 3D Gaussian Splatting (3DGS) model, RIDE combines sparse metric depth observations derived from PnP-RANSAC inlier correspondences with the geometric prior of a pretrained video-depth model. To handle uneven and intermittent observations, it integrates global and local depth correction with temporal memory, supporting depth estimation through short observation gaps after metric scale initialization. Trained on public RGB-D videos, RIDE is evaluated on robot sequences without fine tuning. Experiments show improved depth accuracy and temporal consistency over scale-only calibration, demonstrating how localization geometry can support both pose recovery and dense robot perception.
Event cameras, with high temporal resolution, high dynamic range, and asynchronous sensing characteristics, have shown great potential for dense 3D reconstruction. Traditional reconstruction methods based on off-the-shelf pose estimates achieve high efficiency but produce low-fidelity results, as inaccurate pose initialization introduces cumulative reconstruction errors. In contrast, recent SLAM-style methods stabilize joint pose-scene optimization through incremental tracking and mapping, yielding higher reconstruction fidelity at the expense of considerable computational overhead. To address this trade-off, this paper presents EvTrajGS, an accurate and efficient 3D Gaussian Splatting framework for unposed event streams. Our method enables reliable joint pose-scene optimization initialized from coarse pose priors, eliminating the need for computationally expensive SLAM-style pipelines. EvTrajGS parameterizes camera motion as a continuous-time trajectory initialized from discrete camera poses, providing a unified representation for pose refinement. We then aggregate adjacent trajectory states into a temporally coupled pose, promoting temporally consistent pose updates during joint optimization. Additionally, we introduce a loss-reweighted event sampling strategy to adaptively emphasize temporally under-reconstructed intervals. Extensive experiments on both synthetic and real-world datasets demonstrate that EvTrajGS outperforms state-of-the-art methods in terms of both geometric reconstruction quality and pose estimation accuracy, achieving 3.8 dB higher PSNR, 0.1 higher SSIM, and over 40\% lower ATE RMSE while retaining high computational efficiency.
Zixuan Chen, Jiakai Zhang, Junhao Dong et al.· 0 citations
Existing feed-forward 3D reconstruction methods typically process a bounded number of images and recover cameras and geometry in local or internally normalized frames. Extending them to large-scale UAV mapping requires scalable multi-chunk processing and reliable aggregation, while full Sim(3) alignment can become unstable for near collinear trajectories. We present GeoFF3D, which combines a coordinate-anchored model with a spatial large-scale reconstruction framework (SLRF). The model uses georeferenced camera translations and optional geometric priors to predict camera poses and dense point maps directly in a gravity-aligned Z-up metric frame. SLRF partitions images into spatially overlapping chunks, propagates shared-view priors, and aggregates local reconstructions hierarchically, while remaining applicable to different bounded-view models. Across nine aerial mapping blocks, GeoFF3D achieves the best average reconstruction quality, improving F@5 from 0.829 for Pi3X + SLRF to 0.877. On long UAVScenes sequences, it reaches 0.848, compared with 0.687 for Pi3X + SLRF and 0.451 for the strongest evaluated SLAM/streaming baseline. GeoFF3D reconstructs 2,000 images in approximately five minutes, demonstrating scalable and robust large-scale UAV reconstruction.The code is available at https://github.com/yanxian-ll/GeoFF3D.
Xiang-Hui Yang, Yongli Wang, Yunsheng Zhang et al.· 0 citations
KP-SLAM is proposed, which predicts dense optical flow and paired pointmap priors from a shared representation and incorporates them into the same BA backend and introduces a Depth-Scale-Pose-to-Pointmap (DSPP) objective that relates optimized inverse depth, edge-wise relative scale, and camera pose to paired pointmap constraints.
Song Gao, Xinyu Huang, Zheng Huang et al.· Symmetry· 0 citations
Streaming 3D reconstruction from extremely long videos requires estimating camera motion and scene geometry online under bounded memory and computation. Early streaming models achieve causal, bounded-cost inference using finite context buffers or compact recurrent states, yet their estimates often deteriorate as sequences grow. Recent methods improve long-horizon stability by coupling short-range context with persistent or multi-level long-range memory. We pursue a different route: we keep the learned temporal state strictly local and formulate predictions whose targets remain independent of sequence length. We present ABot-Recon, a simple streaming model that caches KV features from only the preceding 11 frames. It predicts a point map in the current camera coordinate system together with an adjacent-frame relative pose. These predictions remain equivariant under changes of reference frame, and global poses and geometry are recovered through sequential composition. To reduce accumulated drift, a lightweight temporal refiner improves relative rotations using recent visual and motion context, while a composition-aware pose loss supervises multi-step pose composition. Extensive evaluations on challenging long-sequence benchmarks demonstrate the superior long-horizon performance of our local-context approach. On Oxford Spires, ABot-Recon achieves an ATE of 4.35 m and an RPE-R of $0.12^\circ$, reducing both errors by approximately 40\% relative to the best prior results.
Jiarong Han, Jincheng Xiong, Yu-Zhou Liu et al.· 0 citations
We use cookies to run the site and, with your consent, for analytics and to show ads.
See our Cookie Policy.
