Aug 2026· Applied Sciences· Vol 16, pp. 8237· 0 citations· 56 references
Abstract
The moisture sorption isotherms of corn extrudates fortified with ultrafiltration (UF) concentrate derived from rose wastewater (RWW) were examined. Two formulations containing 4 g (sample S4) and 11 g (sample S11) of retentate, respectively, per 100 g of semolina were prepared and subsequently extruded. Adsorption and desorption isotherms of both samples were determined at 10 °C, 25 °C and 40 °C using the static gravimetric method within a water activity range of 0.11–0.85. The experimental data of equilibrium moisture content (EMC) were fitted using modified GAB, modified Oswin, and modified Halsey equations. The monolayer moisture content of the samples was determined using the BET model. The results showed that the sorption isotherms exhibited a typical sigmoidal (Type II) shape and a pronounced hysteresis effect between adsorption and desorption. The hysteresis effect decreased with increasing temperature. Based on the combined evaluation of error analysis and residual distribution, the modified Oswin model provided the most balanced overall performance and was determined as suitable for the description of the sorption isotherms of the extrudates studied. The effect of UF-retentate level on EMC was not uniform and depended on temperature, water activity, and sorption direction. The monolayer moisture content of the extrudates varied from 4.08 to 8.39% d.b. The higher retentate level was generally associated with higher monolayer moisture values. Packaging and storage at the theoretically estimated range of water activities from 0.09 to 0.24 may be expected to maintain EMCs close to the monolayer.
Sorption drying removes water from seeds at ambient temperature by contact with a granular hygroscopic solid, thereby avoiding thermal stress. We studied the drying kinetics of barley (Hordeum vulgare L.) using granulated kieserite MgSO4·H2O and characterised the desiccant by SEM, XRD, and DSC–TG. Barley wetted to 19–2...
T. Ivanenko, E. Fomenko, E. Morozov et al.· AgriEngineering· 0 citations
Moisture content critically affects the physical and mechanical performance of bamboo. To enable rapid prediction of the moisture content of Moso bamboo (
Phyllostachys edulis
), this study investigated the isothermal sorption behavior of three types of bamboo: untreated (UT), chemically modified (CT), and therma...
Rui-Jun Ma, Yi-Peng Yao, Xin Cheng et al.· Journal of materials in civi...· 0 citations
The low nitrogen use efficiency of applied fertilizers, often below 50% in most agroecosystems, is a significant concern. Biochar (BC) has large micropore structures, high surface area, and surface charges, which improve soil nutrient retention; these properties depend on pyrolysis conditions and the type of feedstock....
N. Jayarathna, S. Dharmakeerthi, A. Igalavithana· Journal of the National Scie...· 0 citations
The primary goal of this research was to synthesize a nanocomposite from a native biomass‐derived material for the effective removal of malachite green (MG) dye from wastewater. The zirconium oxide‐incorporated sugarcane bagasse biochar (ZrO
2
–SBB NCs) nanocomposites were synthesized using an ultrasonication‐ass...