Scanning photocurrent microscopy (SPCM) is a powerful technique for probing local optoelectronic phenomena in 2D semiconducting devices. However, commercial setups remain costly, complex and often lack flexibility and adaptability. In this work, we present a home-built SPCM platform built around the retrofitting of a conventional metallographic microscope by coupling it with different light sources (single-mode fiber-coupled lasers and multimode fiber-coupled high-power LEDs), a motorized XY stage, a digital camera and an electronic readout module. This system enables simultaneous acquisition of photocurrent and reflection intensity maps, requiring minimal modifications of the microscope. We reached sub-micron spatial resolution and high imaging fidelity by correlating photocurrent maps with reflection maps, optical micrographs and AFM topography data on different devices fabricated with different materials (InSe, MoS2, WSe2, Gr), on different substrates (Si/SiO2, compact disk). This work provides a reliable, accessible and reproducible high-performance SPCM platform that can be easily implemented in most laboratories for microscale optoelectronic characterization of 2D devices.
Multi-photon lithography (MPL), which predominantly utilises femtosecond lasers, is a significant maskless, high-resolution and ambient (non-vacuum) lithography technique. To achieve a comparable resolution to primary competing solutions, such as electron-beam lithography, and to improve processing efficiency or throug...
Visible microspectrophotometry enables the non-destructive acquisition of spectral information from microscopic regions and constitutes a valuable tool for the experimental teaching of spectroscopy, microscopy, and optical instrumentation. This work presents the design, fabrication, and evaluation of a low-cost ocular...
I. Orlando-Guerrro, U. Ruiz-Corona, Z. Hernández-Paxtian et al.· Applied Spectroscopy· 0 citations
Two-dimensional (2D) materials have shown great potential for applications in environmental monitoring and sensing due to their unique physical and chemical properties. In particular, molybdenum disulfide (MoS2) has emerged as a versatile 2D material platform for many optical and optoelectronic applications due to its...
A. N. Ghosh, Ming-Fei Xiao, Jin-Rui Chen et al.· ACS Photonics· 0 citations
Laser-Induced Forward Transfer (LIFT) has emerged as a versatile and widely used technique for the precise deposition of functional materials, enabling applications ranging from microelectronics to photonics and bioengineering. However, its potential to directly generate ordered sub-wavelength structures during the tra...
Arthur Lamboley, Christophe Hubert, Karine Masenelli-Varlot et al.· EPJ Web of Conferences· 0 citations
Owing to their ultrashort pulse duration and high peak power, ultrafast lasers enable the fabrication of micro-/nanostructures and the localized tailoring of material properties in a wide range of materials through strong nonlinear absorption, with a limited heat-affected zone. This paper reviews four representative ap...
Yu-Kun Wang· Theoretical and Natural Scie...· 0 citations
Quantitative, nondestructive characterization of materials at the nanoscale is crucial for the development of advanced energy, electronic, and nanostructured systems. In this context, microscopy based on extreme ultraviolet (EUV) radiation has recently attracted considerable interest, as it combines high spatial resolu...
Leona Licht, W. Eschen, Chang Liu et al.· ACS Applied Materials and In...· 0 citations
We use cookies to run the site and, with your consent, for analytics and to show ads.
See our Cookie Policy.