Skip to content
Open access

Experimental Study on the Evolution Mechanism of Shear-Slip Rockburst Using a Rockburst-Prone Synthetic Material

Sep 2026 · Applied Sciences · 0 citations · 33 references

Abstract

To investigate the mechanical response and evolutionary mechanisms of shear-slip rockburst in fractured rock masses, intact, single-fracture, and double-fracture cubic specimens were fabricated using a self-developed synthetic material designed to reproduce pronounced elastic energy storage and rapid brittle failure. Shear-slip tests were conducted under normal stresses ranging from 0.9 to 3.6 MPa. The impact energy index, elastic energy index, and dynamic failure time of the material were 18.0, 9.2, and 140 ms, respectively. Shear stress, shear displacement, and normal displacement were monitored synchronously, while stress-drop events, shear-surface damage, and rock-powder mass were analyzed to clarify the controlling effects of normal stress and the fracture configuration. The results showed that, as the normal stress increased from 0.9 to 2.7 MPa, asperity interlocking along the shear surface was enhanced, resulting in overall increases in the peak and residual shear strengths and progressive suppression of dilation. At 3.6 MPa, all three specimen types exhibited pronounced stress drops, normal contraction, and complete loss of shear-bearing capacity, indicating a transition from stable frictional sliding to crushing collapse dominated brittle instability. The tested specimens suggest that increasing the number of prefabricated fractures may promote deformation localization and shorten the stable post-peak sliding process. At 3.6 MPa, the shear displacements corresponding to complete instability of the intact, single-fracture, and double-fracture specimens decreased from 9.0 to 7.8 and 6.5 mm, respectively, whereas the maximum stress drops increased from 0.28 to 0.62 and 0.90 MPa. These responses were characterized by earlier instability, increasingly concentrated stress-drop events, and larger individual stress drops. With increasing normal stress, the mass of rock powder increased from 11 to 56 g, indicating that shear surface damage evolved from localized fracturing to intensive crushing and grinding. The shear-slip process comprised four stages: compaction adjustment and load-bearing structure formation, elastic shearing and energy accumulation, damage accumulation and crack coalescence culminating in peak instability, and fragment reorganization with post-peak sliding. These findings provide experimental evidence for identifying shear-slip dynamic instability in fractured surrounding rock.

Read PDF

Similar papers

Open access Aug 2026

Study on creep deformation behavior and constitutive model of filled fractured sandstone under freeze-thaw cycles

The time-dependent deformation and stability of fractured rock in seasonally frozen regions constitute a key scientific issue for engineering safety. To investigate the long-term deformation of fractured rock under the coupling of freeze-thaw (F-T) cycles and sustained loading, this study systematically examined the ef...

Rui Li, Jian-Xi Ren, Kai Su et al. · 0 citations
Open access Sep 2026

Numerical investigation of the effects of normal stress and shear displacement on fracture closure and permeability evolution in rough granite fractures

Fracture closure and permeability evolution in rough granite fractures considering normal stress and shear displacement are critical for numerous underground engineering applications, including enhanced geothermal systems, radioactive waste repositories, and underground energy storage. Despite extensive research on s...

Qing-Sen Meng, Yan-Jun Shang, Xue-Tao Yi et al. · 0 citations
Open access Oct 2026

Mechanical response of a rock mass with parallel double fissures under the coupled action of fracture water pressure and fissure inclination angle

Existing studies on hydro-mechanical coupling in fractured rock masses have mostly focused on a single fracture or a single influencing factor, and there remains a lack of systematic understanding of the mechanical response and governing mechanisms of parallel double-fissure structures under the synergistic effects of...

Xin Chen, Ke-Gang Li, Dong Tian · 0 citations
Dec 2026

Improved Nonlinear Burgers Shear-Creep Model for Rock Masses Disturbed by Dynamic Loading

The mechanical properties of engineering rocks and the long-term stability of tunnels and stopes are mainly controlled by weak structural surfaces, which are prone to shear creep under geostress. Dynamic disturbances induced by drilling and blasting during excavation exacerbate shear-creep failure. It is of great sig...

Lei-Lei Niu, Qiu-Fang Yin, Wan-Cheng Zhu et al. · 0 citations
Open access Oct 2026

Effects of crack inclination and aperture on mechanical properties and fracture behavior of sandstone: an experimental study based on acoustic emission monitoring

: The inclination and aperture of rock fractures significantly influence the mechanical properties and crack propagation behavior of rock masses. To investigate the deformation characteristics and crack evolution in sandstone, uniaxial compression tests were conducted on specimens containing pre-existing cracks with di...

Dong-Qian Zhu, Zhen-Jie Zhang · 0 citations

We use cookies to run the site and, with your consent, for analytics and to show ads. See our Cookie Policy.