Skip to content
Open access

Mechanical response of a rock mass with parallel double fissures under the coupled action of fracture water pressure and fissure inclination angle

Oct 2026 · Engineering Research Express · Vol 8, pp. 205104 · 0 citations · 38 references
Physics

Abstract

Existing studies on hydro-mechanical coupling in fractured rock masses have mostly focused on a single fracture or a single influencing factor, and there remains a lack of systematic understanding of the mechanical response and governing mechanisms of parallel double-fissure structures under the synergistic effects of water pressure and inclination angle. To investigate the mechanical response of rock specimens containing parallel double fractures with fixed fracture spacing under the coupled effects of fracture water pressure and fracture inclination angle, numerical simulations were conducted using COMSOL Multiphysics. The peak stress, crack propagation, failure modes, and internal fluid pressure evolution of specimens under various loading conditions were systematically analyzed. The main conclusions are as follows: (1) Within the investigated two-dimensional parallel double-fracture model with fixed fracture spacing, peak stress generally decreases with increasing fracture water pressure but increases with fracture inclination, indicating a weakening effect of water pressure on specimen load-bearing capacity. (2) Peak stress exhibits an approximately linear relationship with fracture water pressure, with R2 values ranging from 0.85054–0.99695. The absolute fitted slope increases from 1.206 at 0° to 3.753 at 90°, indicating greater sensitivity to water pressure at higher fracture inclinations. (3) Fracture water pressure and inclination jointly affect peak stress. The minimum peak stress is 2.42 MPa at 0° and 3 MPa, whereas the maximum is 8.44 MPa at 90° and 1 MPa. (4) Fracture inclination influences crack initiation, propagation, and coalescence. At higher inclinations, cracks are more concentrated near fracture tips and rock bridges, accompanied by faster damage accumulation and more abrupt failure. (5) Internal fluid pressure is non-uniform and locally concentrated near fracture tips, rock bridges, and highly damaged regions. The spatial correspondence between crack and pressure distributions indicates spatial coupling under the simulated conditions.

Read PDF

Similar papers

Open access Nov 2026

Influence of the Geometric Characteristics of Fractures Induced by the Sandstones With Different Strength on the Hydro‐Mechanical Behaviors Within a Single Rock Fracture

The correlation between rock compressive strength and fracture roughness represents a significant area of research within the disciplines of rock mechanics and geological engineering. In this study, laboratory flow experiments were performed on sandstone (with different compressive strengths) single‐fractures creat...

Gao-Han Li, Jun-Chao Chen, Kai Xu et al. · 0 citations
Open access Oct 2026

Crack propagation mechanisms in single-fractured red sandstone under freeze–thaw cycles considering water content and fracture inclination

To elucidate the coupled effects of water content and fracture inclination on crack propagation and failure evolution in single-fractured red sandstone under freeze–thaw conditions in cold regions, freeze–thaw cycling–uniaxial compression tests were conducted on specimens with varying water contents and fracture inclin...

Cun-Gen Wang, Jia-Yi Liu, Shu-Peng He et al. · 0 citations
Open access Sep 2026

Study on Hydraulic Fracture Propagation in Rock with a Coupled Hydro-Mechanical Phase-Field Model

Hydraulic fracture propagation directly affects stimulation efficiency in low-permeability unconventional reservoirs and is influenced by in situ stress, fluid injection, and bedding structure. In this study, a coupled hydro-mechanical phase-field model was developed by combining solid mechanics, porous media flow, and...

Xiang-Xiang Zhang, Ke-Run Chen, Hong-Qiang Dou et al. · 0 citations
Open access Oct 2026

Dynamic Process of Hydraulic Fracturing Under Triaxial Compression

Rock fracturing at a certain depth in the subsurface is caused by the weight of overlying strata and elevated fluid pressure in confined formations. It produces tensile fractures, with fracture walls moving against fluid pressure. Given that an individual fracture can form in a short time, capturing the dynamic process...

Yun-Tao Liu, Jian Yang, J. Min et al. · 0 citations
Open access Sep 2026

Hydraulic Fracture Cross-Layer Propagation in Multicyclic Sandstone: Experimental Investigation of Driving and Resisting Stress Competition for Reservoir Stimulation

Efficient stimulation of heterogeneous sandstone reservoirs requires a comprehensive understanding of cross-layer hydraulic-fracture propagation and its controlling mechanisms. Taking the Jurassic Lianggaoshan Formation in the Sichuan Basin as the geological prototype, 300 mm cubic artificial specimens containing coars...

Tao Wang, Li Li, Wei-Hua Chen et al. · 0 citations
Open access Oct 2026

Effects of crack inclination and aperture on mechanical properties and fracture behavior of sandstone: an experimental study based on acoustic emission monitoring

: The inclination and aperture of rock fractures significantly influence the mechanical properties and crack propagation behavior of rock masses. To investigate the deformation characteristics and crack evolution in sandstone, uniaxial compression tests were conducted on specimens containing pre-existing cracks with di...

Dong-Qian Zhu, Zhen-Jie Zhang · 0 citations

We use cookies to run the site and, with your consent, for analytics and to show ads. See our Cookie Policy.