Skip to content
Open access

Mathematical Modeling and Multi Loop Control for 6-DOF 25kg Digital Servo Educational Desktop Robotic Arm V2

2026 · International journal of research and innovation in applied science · Vol 11, pp. 942-950 · 0 citations

TL;DR

Although peak errors in some joints remain unchanged due to system constraints and coupling effects, the overall dynamic response, stability, and convergence speed are greatly enhanced and highlight the effectiveness of intelligent optimization techniques in improving classical control strategies for complex robotic systems.

Abstract

This study presents the mathematical modeling and control of a 6-DOF 25 kg Digital Servo Educational Desktop Robotic Arm using a multi-loop control framework based on conventional PID and Particle Swarm Optimization (PSO)-tuned PID controllers. The robotic system was modeled as a nonlinear, coupled dynamic system incorporating inertia, Coriolis, and gravitational effects, alongside realistic actuator constraints derived from servo motor specifications. A simulation environment was developed to evaluate the tracking performance of both control strategies under a smooth reference trajectory applied to all joints. The PSO algorithm was employed to optimally tune the PID gains by minimizing tracking error, thereby enhancing controller adaptability to system nonlinearities. Performance evaluation was conducted using both qualitative and quantitative metrics, including trajectory tracking plots, error convergence, phase portraits, Integral of Absolute Error (IAE), and maximum absolute error. Results demonstrate that the PSO-based PID controller significantly improves tracking accuracy and reduces cumulative error across all joints compared to the conventional PID controller. Although peak errors in some joints remain unchanged due to system constraints and coupling effects, the overall dynamic response, stability, and convergence speed are greatly enhanced. The findings highlight the effectiveness of intelligent optimization techniques in improving classical control strategies for complex robotic systems.

Read PDF

Similar papers

Open access Sep 2026

Precision enhancement in drone position control based on optimized PID: A comparative study

This paper presents a comparative study of quadrotor trajectory tracking performance using proportional integral derivative (PID) controllers optimized by two nature-inspired metaheuristic algorithms: the flower pollination algorithm (FPA) and particle swarm optimization (PSO). A nonlinear dynamic model of the quadroto...

Imam Barket Ghiloubi, Latifa Abdou · 0 citations
Conference Sep 2026

Model predictive control optimization for high-inertia turntable servo systems: position loop adaptation and performance validation

In follow-up control of large-inertia turntables, directly applying a position-loop controller designed for point-to-point positioning often leads to frequent start–stop behaviors and pronounced velocity oscillations. To address this issue, this paper proposes a model predictive control (MPC)-based position-loop strate...

Xiang Xuan, Jun-Shun Yuan, Yong Liu · 0 citations
Open access Sep 2026

Performance assessment of fractional order PID control for a 2DOF flexible joint robotic manipulator under various operating conditions

Flexible joint robot manipulators (FJM) exhibit high nonlinear dynamics and coupling effects, which make their control a challenging task. This paper proposes a fractional order PID (FOPID) cascade control strategy for a 2DOF FJM. The controller performance is compared with that of a sliding mode controller (SMC) under...

Ahmed M. Alkamachi, A. Mary · 0 citations
Open access Aug 2026

The Design Process of a 2-DOF PID Controller Applying the Salp Swarm Algorithm for Position Control of a Linear DC Motor

Conventional single-degree-of-freedom PI and PID controllers face a trade-off between fast tracking and low overshoot in precision position control. This paper investigates the design of a two-degree-of-freedom proportional-integral-derivative (2-DOF PID) controller for position control of a Linear DC Motor. The Salp S...

Sitthisak Audomsi, Palapol Sawatphol, Thanawat Prakhongwong et al. · 0 citations

We use cookies to run the site and, with your consent, for analytics and to show ads. See our Cookie Policy.