Jul 2026· Italian National Conference on Sensors· Vol 26, pp. 4281· 0 citations· 46 references
Medicine
TL;DR
A DOA estimation method that integrates a dynamic-pruning strategy with an adaptive subspace tracking mechanism that reduces computational complexity while enhancing algorithmic stability in complex and time-varying noise environments is proposed.
Abstract
In outdoor road environments, vehicle acoustic source direction-of-arrival (DOA) estimation is challenged by a low signal-to-noise ratio (SNR), dynamic-noise interference, and stringent real-time requirements. Under such conditions, conventional methods often struggle to achieve an effective balance among estimation accuracy, computational efficiency, and robustness against noise. To address this issue, this paper proposes a DOA estimation method that integrates a dynamic-pruning strategy with an adaptive subspace tracking mechanism. The proposed approach reduces computational complexity while enhancing algorithmic stability in complex and time-varying noise environments. Extensive experiments conducted on simulated data, the LOCATA dataset, and real-world outdoor road measurements demonstrate that the proposed method achieves comparable or superior DOA accuracy relative to conventional approaches, while significantly reducing computational cost. Furthermore, it exhibits stronger stability and robustness in real-world static and dynamic vehicle localization scenarios. Our method achieves a more favorable trade-off among multiple performance metrics. The results show that this method has good engineering application potential in complex outdoor environments, and can provide a practical solution for real-world vehicle monitoring.
The proposed IQ-MobNet DoA estimation model achieves this competitive performance with substantially lower computational complexity, requiring only 0.24 million parameters and 0.42 million Floating Point Operations (FLOPs), representing a reduction of over 96% compared to the recent neural network models.
Neeraja P. Kovilakam, Bindiya T. Sambasivan, Raghu C. Variyam· Electronics· 0 citations
In Indoor Positioning Systems, continuous high-frequency Wi-Fi fingerprint scanning is a primary cause of battery depletion in resource-constrained IoT mobile nodes. While simply extending the scan interval can reduce energy consumption, it often fails to effectively compensate for the resulting data sparsity and posit...
Hyeongmin Kim, Young-Bae Ko· International Conference on...· 0 citations
Accurate and stable position and orientation estimation in indoor environments is critical for many real-world applications, yet remains an open challenge without a universally optimal solution. In this work, we propose A-LOAF, a novel acoustic-based system that achieves real-time and precise indoor localization and or...
Guang-Yao Liu, Yuzhang Xi, Weimeng Cui et al.· IEEE Transactions on Instrum...· 0 citations
This work presents a real-time, edge-deployable multimodal framework that integrates acoustic sound source localization (SSL) with visual object detection and tracking to close this initialization gap in urban environments.
Chidera Igwebuike, Akemi Vasquez, Wagdy H. Mahmoud et al.· Journal of the Acoustical So...· 0 citations
A feedback-guided DNN-based controller fusion framework for robust fixed-parameter ANC that combines a causal WaveNet controller with a feedback-guided mixture-of-experts (MoE) module, where a gating network estimates the weights of multiple pre-trained FIR experts according to the current acoustic condition.
Lu Bai, Yiming He, Xiaofeng Nan et al.· 0 citations
Experimental results demonstrate that TADA achieves a 44.7% improvement in RMSE compared to conventional EKF and significantly outperforms the state-of-the-art (SOTA) GMC-EKF algorithm and provides a robust and high-precision solution for indoor positioning.
Zhiran Shi, Le Gao, Ruoyu Chen et al.· Measurement science and tech...· 0 citations
We use cookies to run the site and, with your consent, for analytics and to show ads.
See our Cookie Policy.