Skip to content
Open access

Co‐Ligand‐Induced Electronic Modulation Controls Substrate Adsorption and Selectivity in Biomass Electrooxidation

Sep 2026 · Advancement of science · 0 citations · 57 references
Medicine

Abstract

ABSTRACT The electrooxidation of 5‐hydroxymethylfurfural (HMF) to 2,5‐furandicarboxylic acid (FDCA) is often limited by competitive adsorption between HMF and surface‐bound hydroxyl species (OHads), which governs both activity and selectivity, yet independent control over these interfacial adsorption processes remains a fundamental challenge. Here, we report a molecular design strategy that introduces distinct anionic co‐ligands into Cu‐based catalysts to modulate the electronic density of the metal center and, consequently, its interaction with both OHads and HMF. This approach enables differential tuning of competing adsorption processes on the same active sites, effectively reshaping their intrinsic coupling under fixed reaction conditions. As a result, the optimized catalyst achieves catalyst‐controlled pathway selectivity together with efficient FDCA production, delivering a Faradaic efficiency of 99%, a selectivity of 98%, and a high partial current density of 351 mA cm−2 at 1.6 V vs. RHE. In situ attenuated total reflectance (ATR) infrared spectroscopy reveals distinct adsorption behaviors and reaction intermediates, providing molecular‐level insight into the origin of selectivity. This work establishes co‐ligand engineering as an effective strategy for precise interfacial adsorption control in electrocatalysis, enabling catalyst‐controlled pathway selectivity beyond conventional regulation by pH and applied potential.

Read PDF

Similar papers

Sep 2026

CO2 Capture and Utilization: Selective Synthesis of 2‐Oxazolidinone by Employing Frustrated Lewis Pair‐Enriched Zn‐NC Catalyst Derived From MOF

In this study, CO2 was captured in monoethanolamine, forming hydroxyethyl carbamate, which was subsequently converted into 2‐oxazolidinone under ambient conditions with the aid of a Zn‐NC catalyst derived from MOF. The catalyst was extensively characterized using PXRD, N2 Sorption, NH3 and CO2‐TPD, H2‐TPR, XPS, EPR, Ra...

S. Sujith, M. Harsha, H. K. Meghana et al. · 0 citations
Open access Sep 2026

Interface‐regulated Co‐doped Pd/ ZSM ‐5 toward efficient selective hydrogenation of phenol to cyclohexanone

Cyclohexanone serves as a crucial precursor in the chemical industry and can be produced via selective hydrogenation of phenol, a process that suffers from sluggish reaction kinetics and over‐hydrogenation to cyclohexanol. This study develops a hierarchical ZSM‐5 zeolite‐supported Pd–Co bimetallic catalyst (Pd–Co/D...

Dian-Cong Guo, Yu-Tong Wang, Xin Yu et al. · 0 citations
Open access Sep 2026

Synergic Regulation of Active Site Electron Polarization and Interlayer Electron Coupling in COFs for Photocatalytic Hydrogen Peroxide Synthesis.

Covalent organic frameworks (COFs) are promising photocatalysts for the oxygen reduction reaction (ORR), yet reconciling the different electronic requirements in different elementary steps remains challenging. Herein, guided by the Sabatier principle and Marcus-Hush electron-transfer theory, we report a PyaD COF with d...

Rui-Han Wang, Jia-Fu Shi, Bing-Chen Guo et al. · 0 citations
Open access Aug 2026

Regulating the C1 Pathway of Ethanol Electrooxidation via OH‐Mediated Surface Engineering on Ag‐Modified PdCu Catalysts

Direct ethanol fuel cells (DEFCs) offer a promising route for sustainable energy conversion, yet their efficiency is fundamentally constrained by the ethanol oxidation reaction (EOR), which predominantly proceeds via incomplete C2 pathways due to sluggish C–C bond cleavage and severe surface poisoning. Developing e...

Meng-Jie Chen, Yong-Kang Sun, Wen-Ke Liu et al. · 0 citations
Review Open access Aug 2026

Polymer Molecular Interface Engineering—Enhanced Cu‐Based Catalysts for the CO 2 Electroreduction Reaction

Cu‐based electrocatalysts are the most efficient viable catalysts for converting CO 2 into multi‐carbon products. However, Cu‐based catalysts still suffer from high overpotential, low selectivity for single C 2 and C 2+ products, and insufficient stability. In recent years, researchers have regarded the engin...

Hao-Quan Peng, Xin-Yi Tan, Ya-Lin Xie et al. · 0 citations
Open access Oct 2026

Mechanistic Study of CO2 Reduction in a Metal Nanoparticle/Ligand-Based Nanoconfined Pocket

Electrochemically reducing CO2 holds promise for producing value-added chemicals. Achieving this requires electrocatalysts with high selectivity and energy efficiency. Nanopocket engineering enhances catalytic activity by modulating interfacial reactivity and stabilizing key intermediates, especially those involved i...

Asmita Jana, M. F. Guzman, F. Habibzadeh et al. · 0 citations

We use cookies to run the site and, with your consent, for analytics and to show ads. See our Cookie Policy.