Skip to content
Open access

Corrosion-Resistant Compounds Based on Polymer Matrices and Inorganic Additives

Jul 2026 · Vestnik Tomskogo gosudarstvennogo arkhitekturno-stroitel nogo universiteta JOURNAL of Construction and Architecture · Vol 28, pp. 241-254 · 0 citations · 10 references

Abstract

Corrosion of metal and reinforced concrete structures remains one of the most serious problems affecting strength and durability of products. It is primarily caused by environmental factors such as chloride, sulfate, and carbon dioxide exposure. Various methods are widely used to apply corrosion-resistant coatings onto metal surface. Purpose:  The aim of this work is to synthesize corrosion-resistant compounds based on polymer matrices and inorganic additives and investigate their corrosion-resistant properties. Methodology/approach:  It is shown that proposed compositions can be used as a complex protective coating. The introduction of a mixture of iron oxides with variable valence into the polyurethane polymer matrix significantly reduces the corrosion rate in chloride-containing environments due to secondary redox processes in the protective layer. The contact angle, adhesive strength are calculated, and the Pourbaix diagram is analyzed. Research findings:  Synthesized are corrosion-resistant compounds based on metal-phosphate binders incorporated into polyurethane, polyvinyl acetate or alkyd polymer matrix. Practical implications:  Polymer matrices combined with chemical additives and fillers have advantages in the protection efficiency, cost-effectiveness, and environmental sustainability, and such compounds can be used for corrosion protection.

Read PDF

Similar papers

Review Open access Aug 2026

Green and Bio-Based Corrosion Inhibitors for Reinforced Concrete: Recent Advances, Mechanisms, Durability, and Future Perspectives

Corrosion of reinforcing steel remains a major cause of premature deterioration in concrete infrastructure, motivating the development of inhibitors with lower toxicity and reduced environmental impact. This review critically examines recent advances in green and bio-based corrosion inhibitors for reinforced concrete,...

I. Castañeda-Robles, A. López-León, E. Pérez-Ruíz et al. · 0 citations
Review Open access Aug 2026

Corrosion Behaviour of Aluminium Metal Matrix Composites (AMMCs) in Marine/Seawater Environments: A Review

Aluminium Metal Matrix Composites (AMMCs) are becoming popular materials for marine, aerospace, and offshore structures. This is because they are known to be strong for their weight, have better tribological performance, and are thermally stable. Despite these properties, corrosion problems still hinder their long-term...

Peter P. Ikubanni, Akinkunmi O. Mosadomi, Olorunsogo B. Ogundipe et al. · 0 citations
Conference Open access Sep 2026

A Simple and Sustainable Route to Epoxy-Silica Coating with Improved Corrosion Inhibition and Mechanical Properties

Epoxy coatings are commonly chosen for protecting metals from corrosion, but surface defects and weak resistance to physical stress sometimes limit their durability. In this study, an eco-friendlier epoxy-silica (ES) composite coating is developed by using amorphous SiO2 extracted from rice husk ash (RHA) using a simpl...

K. Simfroso, Gina Catalan, Alistaire Kerwin Acma et al. · 0 citations
Open access Oct 2026

Long-Term Electrochemical Evaluation of Commercial Surface-Applied Corrosion Inhibitors for Chloride-Contaminated Reinforced Mortar

The corrosion of reinforcing steel induced by chloride ingress is one of the main causes of premature deterioration in reinforced concrete structures. Among the available mitigation strategies, surface-applied corrosion inhibitors are attractive as a repair option because they are inexpensive and easy to apply to exist...

L. Djenaoucine, Andrés F. Bonilla, A. Moragues et al. · 0 citations

We use cookies to run the site and, with your consent, for analytics and to show ads. See our Cookie Policy.