Skip to content
Open access

Experimental and FEM Analysis of Internal Stator Coil Capability for Detection of Multiple Rotor Faults and Fault Interactions in Induction Motors

2026 · IEEE Access · Vol 14, pp. 156364-156378 · 0 citations · 23 references

Abstract

Rotor fault diagnosis in induction motors is traditionally based on stator current analysis. Although widely used, current-based techniques may exhibit limited sensitivity to certain fault mechanisms, particularly when electrical and mechanical defects coexist. This paper investigates the use of an internal stator tooth search coil as a complementary sensing technique for rotor fault detection under steady-state operation. Experimental measurements and finite element simulations are first conducted under healthy and broken rotor bar conditions to validate the numerical model. The validated model is then used to investigate static eccentricity, dynamic eccentricity, and combined fault scenarios. The stator current and the electromotive force induced in the internal coil are analyzed using power spectral density. The results show that rotor faults affect current and local magnetic flux in different ways. Broken rotor bars generate clear sidebands in both signals, whereas eccentricity mainly modifies the local magnetic field distribution. Dynamic eccentricity produces stronger signatures than static eccentricity, while the latter highlights a limitation of the coil-based approach due to the absence of significant temporal air-gap modulation. For combined faults, the interaction between electrical asymmetry and air-gap nonuniformity leads to more complex spectral patterns that can be identified through the complementary information provided by both measurements. The study demonstrates the potential of internal magnetic field sensing as a complementary approach to conventional current analysis for the diagnosis of individual and interacting rotor faults.

Read PDF

We use cookies to run the site and, with your consent, for analytics and to show ads. See our Cookie Policy.