Skip to content

Vortex-reconstruction and source-suppression mechanisms of secondary flows in a compressor cascade induced by a bionic ridge fence

Oct 2026 · The Physics of Fluids · 0 citations · 33 references

Abstract

This study develops a parameterized bionic ridge fence inspired by the dorsal ridge structure of the leatherback turtle and investigates its secondary-flow control mechanisms in a highly loaded compressor cascade. The numerical results reveal two distinct mechanisms. At an incidence angle of 0°, the optimal fence was located at 75% chord length from the leading edge (LE) and 12.5% chord from the suction surface, with a height equal to 20.75% of the incoming boundary-layer thickness. The fence generated additional vortices that separated the passage vortex (PV) and concentrated shedding vortex onto opposite sides of the fence and suppressed their spanwise development. Their interaction, premixing, and dissipation disrupted the original large-scale vortices, redistributed them into smaller-scale structures, and reduced cascade total pressure loss by 1.5%. At an incidence angle of 4°, the optimal fence was located at 50% chord length from the LE and 27.5% chord from the suction surface, with a height equal to 10% of the incoming boundary-layer thickness. The fence acted during the incipient stage of PV development by intercepting and redirecting low-momentum end wall fluid. This weakened the transverse adverse pressure gradient and limited the spanwise lift-up of PV, resulting in a 1.3% reduction in cascade total pressure loss. The results demonstrate that the end wall placement and geometric parameters of the bionic ridge fence significantly influence secondary-flow control effectiveness, providing a physical basis and reference for the further development of passive secondary-flow-control strategies in highly loaded compressor cascades.

View source

We use cookies to run the site and, with your consent, for analytics and to show ads. See our Cookie Policy.