Skip to content

High-frequency broadband underwater acoustic transducer based on an equal-thickness coplanar 3-1/1-3 piezocomposite with thickness-coupled resonance.

Nov 2026 · Ultrasonics · Vol 171, pp. 108362 · 0 citations · 49 references
Medicine

Abstract

A high-frequency broadband underwater acoustic transducer based on thickness-coupled resonance in an equal-thickness coplanar 3-1/1-3 piezocomposite is proposed to address the limited bandwidth and fabrication complexity of conventional multi-thickness broadband transducers. The active element consists of an inner circular 3-1 piezocomposite region and an outer annular 1-3 region with identical thicknesses. Owing to their different phase connectivities and effective electromechanical properties, the two regions exhibit distinct intrinsic thickness-mode resonance frequencies, enabling a broadband dual-resonance response without introducing geometric thickness variation. The piezocomposite element was fabricated using water-jet-guided laser micromachining, dicing, polymer filling, and three-dimensional printing, followed by transducer packaging. Finite element simulations, electrical impedance measurements, laser vibrometry, and underwater acoustic tests were performed to characterize the coupled vibration and electroacoustic performance. The packaged transducer exhibited two underwater resonance peaks at 451 and 537.625 kHz, corresponding to a resonance-frequency separation of 86.625 kHz. Anechoic-tank measurements yielded a peak transmitting voltage response of 157.37 dB with a -3 dB transmitting bandwidth of 100 kHz and a maximum receiving sensitivity of -195.7 dB with a -3 dB receiving bandwidth of 105 kHz. Pulse-echo measurements showed a peak echo voltage of 128.0 mV, approximately 1.80 and 1.69 times those of the single 1-3 and 3-1 piezocomposite transducers, respectively. The results demonstrate that connectivity-induced thickness-resonance coupling in an equal-thickness coplanar architecture provides an effective route to broadband operation while retaining structural simplicity and manufacturing feasibility, offering potential for high-resolution underwater detection and broadband underwater acoustic systems.

View source

We use cookies to run the site and, with your consent, for analytics and to show ads. See our Cookie Policy.