Tuning the structure-piezoelectric property relationship in electrospun PLLA nanofibers through collector-induced fiber alignment
Abstract
Electrospinning has become one of the most common methods to fabricate piezoelectric polymer nanofibers for flexible electronics, sensors, energy harvesting devices, and bioelectronic scaffolds. Fiber alignment is one of many parameters that can impact nanofiber performance attributes since alignment affects mechanical anisotropy, crystal organization, and piezoelectric response. Nonetheless, few published works provide an in-depth discussion of collector rotation speed as it impacts nanofiber alignment, leaving detailed and reproducible methods for tuning alignment-dependent piezoelectric performance largely unreported. Here, we report a standardized electrospinning protocol to reproducibly fabricate piezoelectric nanofibers with controlled alignment through tuning the speed of a rotating collector. The steps in this protocol include preparing polymer solutions, setting up an electrospinning system, determining collector speed, collecting fibers, performing optional post-processing steps, and quantitatively evaluating fiber morphology and piezoelectric response. The protocol was validated through quantification of fiber alignment using scanning electron microscopy coupled with image-based orientation metrics, and piezoelectric performance through quantification of electrical output and piezoelectric coefficients. We demonstrated that increasing collector rotation speed from 1000 to 4000 rpm reduced orientation spread from 19.57° to 11.23°, and showed this increase in alignment was associated with an increase in the effective piezoelectric coefficient (d33) from 3.37 pC/N to 5.92 pC/N and an increase in open-circuit voltage output from 15 mV to 35 mV. These results highlight how the provided protocol enables users to reproducibly tune nanofiber orientation and associated piezoelectric performance. This protocol can aid in the design of scaffolds with tunable properties, wearable sensors, and mechanically-triggered energy harvesting devices.