Effect of ion-implanted amorphous layer thickness on cutting performance of monocrystalline silicon under elliptical vibration cutting: a molecular dynamics study
Abstract
Single-crystal silicon, a typical hard and brittle material, suffers from lattice distortion and subsurface damage during ultra-precision nanomachining. To achieve low-damage and efficient processing, this study combines ion implantation surface modification with elliptical vibration cutting (EVC) and develops an ion-implanted amorphous-layer-assisted silicon nanocutting model using molecular dynamics. The effects of amorphous layer thicknesses (0, 1.75, 3.5, 5.25, and 7 nm) on machining performance at a cutting depth of 3.5 nm were investigated. Results indicate that the amorphous layer changes the removal mechanism from brittle fracture of the crystalline substrate to plastic shear deformation within the modified layer. When the amorphous layer thickness equals the cutting depth (3.5 nm), the subsurface damage is minimized, with reduced high coordination defects, phase transformation, and elastic recovery. Increasing the amorphous thickness further lowers cutting forces, reducing the average tangential force by 33.6% and improving the material removal rate from 76.18% to 87.76%. However, excessive amorphization causes thermal accumulation and structural disorder, increasing subsurface damage. This study provides insights into ion implantation–EVC synergistic machining of silicon.