Skip to content

Techno-economic evaluation of integrated absorption andmineralization process for CO2 capture

Abstract

The emissions of greenhouse gases (GHG) from anthropogenic activities have significantly contributed to global warming and climate change. Among various CO2 capture technologies, the monoethanolamine (MEA)-based absorption process is well established but remains limited by its high reboiler energy requirement for solvent regeneration. To address this issue, an integrated absorption and mineralization (IAM) process using Ca(OH)2 was proposed, evaluated, and validated with experimental data. For a fair comparison with the conventional process, an IAM process model was developed based on 5 million tonne of flue gas per year, achieving a CO2 fixation efficiency above 99%. Simulation results indicate that the IAM process reduces specific energy consumption by nearly 94% compared to the conventional process (1.04 vs. 17.25 GJ/tonne CO2) and achieves substantially lower CO2 emissions (-123.7 vs. -37.9 tonne CO2 /h). However, these energy and environmental advantages are offset by a higher levelized cost of CO2 capture (LCOC) at 210.08 USD/tonne CO2, primarily due to the cost of Ca(OH)2. Valorization of the precipitated CaCO3 byproduct could mitigate this limitation and enhance the overall economic feasibility of the IAM process.

View source

We use cookies to run the site and, with your consent, for analytics and to show ads. See our Cookie Policy.