Skip to content

Feasibility study of glass microchannel plate-based X-ray scintillator screens

Sep 2026 · Journal of Instrumentation · Vol 21 · 0 citations · 34 references
Physics

Abstract

X-ray imaging of the internal structures of samples is becoming increasingly prevalent, and high-resolution detectors enable the visualization of finer details. In indirect detection systems, detector resolution is typically determined by the properties of the scintillator screen. A common approach to fabricating high-resolution scintillator screens is to fill scintillator materials into micropore arrays. This study presents a practical approach to fabricating high-resolution X-ray scintillator screens using microchannel plate (MCP) templates. A 50 μm-deep silver (Ag) coating was deposited on the sidewalls of glass MCPs (21 μm aperture, 25 μm pitch, and 500 μm thickness) to suppress inter-channel crosstalk of scintillation light. Both experimental and simulation results demonstrate that the Ag coating significantly enhances spatial resolution. Furthermore, the influence of scintillator thickness on the modulation transfer function (MTF) was analyzed. Simulations further revealed that extending the Ag coating coverage depth to 500 μm yields additional MTF performance improvement. This work presents a feasible approach to developing high-resolution X-ray scintillator screens and detectors.

View source

We use cookies to run the site and, with your consent, for analytics and to show ads. See our Cookie Policy.