Skip to content
Open access

Force Feedback and Force Sensing in Humanoid Robotic Arm Structures

Oct 2026 · Applied and Computational Engineering · 0 citations

Abstract

Humanoid robotic arms must manage uncertain contact during grasping, assembly, transport, and physical human-robot interaction. Vision and high-gain position control provide useful pre-contact geometry but cannot continuously reveal contact location, force direction, shear, slip, or load variation. This paper examines how force information is generated, transmitted, measured, and fed back through five actuation routes: high-gear-ratio rigid drives, series elastic actuators, variable-stiffness actuators, low-gear-ratio quasi-direct drives, and cable remote drives. Joint torque sensing, wrist six-axis force/torque sensing, and distributed tactile sensing are compared as complementary layers. The synthesis shows that interaction performance depends jointly on reflected inertia, structural stiffness, elastic elements, load paths, calibration quality, and control bandwidth. Sensor placement, overload protection, compliance, thermal management, and maintenance access therefore belong to one structural design problem rather than an afterthought. The paper provides a traceable framework for selecting sensing locations and actuation structures and identifies range, calibration, overload recovery, bandwidth, and serviceability as validation targets for future hardware experiments.

Read PDF

We use cookies to run the site and, with your consent, for analytics and to show ads. See our Cookie Policy.