Skip to content
Open access

Unlocking Three‐Dimensional Electron and Ion Transport in High‐Loading and Dense Lithium‐Ion Battery Electrodes Assisted via Porous Graphene Networks

Oct 2026 · Advanced Energy Materials · 0 citations · 23 references

Abstract

Achieving efficient electron and ion transport in high‐loading, densely packed electrodes remains a major challenge for high‐energy‐density lithium‐ion batteries. Increasing mass loading extends transport pathways for both charge carriers, while electrode densification by roll pressing, essential for maximizing gravimetric and volumetric energy density and minimizing electrolyte content, further restricts ion transport in low‐porosity electrodes. Here, graphene mesosponge (GMS) is introduced as a functional conductive additive that tailors electrode microstructure through its sponge‐like mesoporous framework. High‐loading electrodes based on Co‐free, pure‐Ni layered oxides containing only 1 wt.% GMS exhibit enhanced electronic and ionic conductivity, delivering high reversible capacity with reduced polarization. The deformable mesoporous framework of GMS also buffers compressive stress during roll pressing, enabling practical electrode densities above 3.5 g cm −3 without inducing cracking of the active material particles. Digital‐twin analysis reveals that the porous GMS architecture forms a three‐dimensional electron‐ and ion‐transport network, with electrolyte retained within its mesopores facilitating ion transport and resulting in superior rate capability compared with electrodes containing single‐walled carbon nanotubes. These results demonstrate that GMS is a transformative conductive additive for simultaneously improving energy and power densities in practical lithium‐ion batteries through rational microstructural design of dense composite electrodes.

Read PDF

Similar papers

Sep 2026

Chain‐Networked Micro‐Silicon Electrodes Inducing Internal Isostatic Compressive Stress for High‐Energy and High‐Power Solid‐State Batteries

Micron‐sized silicon (µ‐Si) offers a scalable pathway to high‐capacity anodes, and its application in solid‐electrolyte‐free systems has garnered attention as a strategy to maximize energy density. However, achieving both high energy and power densities in such configurations remains challenging due to the lack of...

Seokjin Kim, K. Raj, Wei-Jian Xue et al. · 0 citations
Open access Oct 2026

Constructing Biomass‐Derived Ultra‐Thin 2D Carbon Nanoweb via Confinement‐Driven Bubbling Effect for High‐Rate Zinc‐Ion Storage in Hybrid Capacitors

Two‐dimensional (2D) carbon materials demonstrate significant potential for energy storage. However, interlayer stacking in high‐mass‐loading electrodes of lamellar 2D carbon materials typically leads to discontinuous interlayer channels, increasing ion diffusion tortuosity. Herein, an ultra‐thin 2D carbon nanoweb...

Yu Chen, Zhi Cheng, Li-Jie Sun et al. · 0 citations
Open access Sep 2026

Particle‐Level ZrO2 Atomic Layer Deposition Enables Fast‐Cycling and Long‐Life Graphite Cathodes for Dual‐Ion Batteries

Fast‐charging and long‐life energy storage systems require electrode architectures that can sustain rapid ion transport while resisting structural and interfacial degradation. Dual‐ion batteries are attractive high‐voltage systems based on reversible anion intercalation into a graphite cathode. However, their long‐term...

Jieun Kang, Sung Eun Jo, Yun-Ah Ji et al. · 0 citations
Open access Nov 2026

High‐Conductivity Active Interface Layer for Active Lithium Reservoir in Micro‐Silicon‐Based All‐Solid‐State Batteries

ABSTRACT Sulfide‐based all‐solid‐state lithium‐ion batteries (ASSLIBs) employing fully active, carbon‐free micro‐silicon (µSi) anodes present significant potential for high energy density, enhanced safety, and reduced cost. However, their practical application is challenged by inherent issues such as sluggish reaction...

Zi-Qing Wang, Xin-Xin Zhu, Rui-Chen Zhu et al. · 0 citations
Oct 2026

3D‐Printed Dual‐Gradient Gel Electrodes Synchronize Ion Transport and Active‐Site Utilization for High‐Energy Zinc‐Ion Hybrid Supercapacitors

High‐mass‐loading gel electrodes are critical for practical zinc‐ion hybrid supercapacitors, but sluggish ion penetration and depth‐dependent reaction heterogeneity hinder their performance. Herein, we report a dual‐gradient MXene/polypyrrole@Carbon nanotube gel composite thick electrode via stepwise multi‐ink 3D p...

Jian Meng, Wen-Hui Tai, Tong Zhou et al. · 0 citations
Open access Oct 2026

Solvent‐Free Roll‐Pressed Sandwiched Li Anode With Dual‐Sided Cu Nanowire Networks for High‐Energy Lithium Metal Batteries

Li metal anodes are promising for next‐generation high‐energy batteries, but their practical use is hindered by dendritic Li growth, unstable interfaces, and large volume fluctuations. Herein, we report a bidirectional sandwich‐structured Li metal anode (SLA) fabricated through a solvent‐free rolling and pressing s...

Jian-Yu Chen, Zhao-Ci Guo, Xu-Dong Chen et al. · 0 citations

We use cookies to run the site and, with your consent, for analytics and to show ads. See our Cookie Policy.